{"title":"Body Trim","description":null,"products":[{"product_id":"gzdl4wd-side-door-trims-body-cladding-car-door-sill-protectors-door-sill-for-triton-l200-2024-1601081055924","title":"Mitsubishi Triton L200 2024+ Door Sill Protector","description":"\u003cp\u003eThis door sill protector kit is designed to fit Mitsubishi Triton (L200) (2024+), protecting the vulnerable door sill and lower body panel area from scuffs, scratches and general wear caused by everyday entry and exit, particularly from footwear contact and loading cargo through the door opening.\u003c\/p\u003e\u003cp\u003eConstructed from durable material designed to withstand repeated contact and general weather exposure, this kit is designed as a direct fitment for Mitsubishi Triton (L200) (2024+), following the factory sill contours closely for a clean, integrated appearance once installed rather than a generic universal fit.\u003c\/p\u003e\u003cp\u003eInstallation is generally straightforward, using automotive-grade adhesive or the factory clip mounting points depending on the specific kit design, typically completable within an hour with basic tools and without requiring any drilling or permanent modification to the vehicle's body panels.\u003c\/p\u003e\u003cp\u003eBeyond the protective benefit, a well-fitted door sill kit also adds a subtle styling element that many owners find complements the vehicle's overall trim level, helping maintain a clean, well-presented appearance around one of the most frequently contacted areas of the vehicle's exterior.\u003c\/p\u003e\u003cp\u003eFor Mitsubishi Triton (L200) (2024+) owners wanting to protect their vehicle's resale value and keep the door sill area looking factory-fresh despite daily use, this kit offers a practical, low-maintenance upgrade that pays off over years of ownership.\u003c\/p\u003e\u003cp\u003ePlease confirm your exact model, generation and year against the compatibility details before ordering, since door sill profiles are specific to each vehicle's body design and door configuration.\u003c\/p\u003e\u003cp\u003eAs part of the Asia Parts Store range for the New Zealand market, this listing is maintained with accurate fitment information so you can check compatibility before ordering. If your specific build, generation or trim level isn't clearly covered in the compatibility details below, it's worth checking your vehicle's VIN or plate details against the listed fitment, or getting in touch for confirmation before you buy, to make sure this part is the right match for your Mitsubishi Triton.\u003c\/p\u003e\u003ch4\u003eVehicle Compatibility\u003c\/h4\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eTrim\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e2024+\u003c\/td\u003e\n\u003ctd\u003eMitsubishi\u003c\/td\u003e\n\u003ctd\u003eTriton\u003c\/td\u003e\n\u003ctd\u003eL200\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Guangzhou Deliang Auto Technology Co., Ltd.","offers":[{"title":"Default Title","offer_id":54453365244222,"sku":"APS-DL4-1601081055924","price":239.5,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0948\/1486\/3678\/files\/GZDL4WD-Side-Door-Trims-Body-Cladding-Car.png?v=1789433966"},{"product_id":"gzdl4wd-luxury-matte-black-auto-modification-accessories-rear-tailgate-cover-for-2012-2021-with-sensor-bracket-1600790847369","title":"2012–2021 Tailgate Cover","description":"\u003cp\u003eThis tailgate cover is designed to fit a wide range of 4x4 and pickup platforms, protecting the tailgate's factory surface from scratches, scuffs and general wear caused by loading and unloading cargo, while also giving the rear of the vehicle a refreshed, more distinctive appearance.\u003c\/p\u003e\u003cp\u003eConstructed from durable, weather-resistant material designed to handle sustained outdoor exposure and repeated contact with cargo, this cover is designed as a direct fitment for a wide range of 4x4 and pickup platforms, following the factory tailgate contours closely for a clean, integrated appearance once installed.\u003c\/p\u003e\u003cp\u003eBeyond the protective benefit, a properly fitted tailgate cover also helps preserve the vehicle's resale value by shielding the factory paint and trim from the scratches and dents that accumulate over years of everyday loading, unloading and general use of the load bed.\u003c\/p\u003e\u003cp\u003eInstallation is generally straightforward, using automotive-grade adhesive or the factory mounting points depending on the specific kit design, typically completable within an hour with basic tools and without requiring drilling or permanent modification to the tailgate itself.\u003c\/p\u003e\u003cp\u003eFor a wide range of 4x4 and pickup platforms owners who use their load bed regularly for work or touring gear, this tailgate cover offers a practical way to protect one of the most heavily used exterior panels on the vehicle, while also refreshing its overall appearance.\u003c\/p\u003e\u003cp\u003ePlease confirm your exact model, generation and year against the compatibility details before ordering, since tailgate cover dimensions and mounting points are specific to each vehicle's tailgate design and any factory sensor brackets fitted.\u003c\/p\u003e\u003cp\u003eAs part of the Asia Parts Store range for the New Zealand market, this listing is maintained with accurate fitment information so you can check compatibility before ordering. If your specific build, generation or trim level isn't clearly covered in the compatibility details below, it's worth checking your vehicle's VIN or plate details against the listed fitment, or getting in touch for confirmation before you buy, to make sure this part is the right match for your vehicle.\u003c\/p\u003e","brand":"Guangzhou Deliang Auto Technology Co., Ltd.","offers":[{"title":"Default Title","offer_id":54453365637438,"sku":"APS-DL4-1600790847369","price":287.4,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0948\/1486\/3678\/files\/GZDL4WD-Luxury-Matte-Black-Auto-Modification-Accessories_jpg.jpg?v=1789433982"},{"product_id":"sports-rear-truck-door-sill-plate-tailgate-protector-cover-for-for-t9-next-gen-2022-2024-1601048857185","title":"2022–2024 Door Sill Protector","description":"\u003cp\u003eThis door sill protector kit is designed to fit a wide range of 4x4 and pickup platforms, protecting the vulnerable door sill and lower body panel area from scuffs, scratches and general wear caused by everyday entry and exit, particularly from footwear contact and loading cargo through the door opening.\u003c\/p\u003e\u003cp\u003eConstructed from durable material designed to withstand repeated contact and general weather exposure, this kit is designed as a direct fitment for a wide range of 4x4 and pickup platforms, following the factory sill contours closely for a clean, integrated appearance once installed rather than a generic universal fit.\u003c\/p\u003e\u003cp\u003eInstallation is generally straightforward, using automotive-grade adhesive or the factory clip mounting points depending on the specific kit design, typically completable within an hour with basic tools and without requiring any drilling or permanent modification to the vehicle's body panels.\u003c\/p\u003e\u003cp\u003eBeyond the protective benefit, a well-fitted door sill kit also adds a subtle styling element that many owners find complements the vehicle's overall trim level, helping maintain a clean, well-presented appearance around one of the most frequently contacted areas of the vehicle's exterior.\u003c\/p\u003e\u003cp\u003eFor a wide range of 4x4 and pickup platforms owners wanting to protect their vehicle's resale value and keep the door sill area looking factory-fresh despite daily use, this kit offers a practical, low-maintenance upgrade that pays off over years of ownership.\u003c\/p\u003e\u003cp\u003ePlease confirm your exact model, generation and year against the compatibility details before ordering, since door sill profiles are specific to each vehicle's body design and door configuration.\u003c\/p\u003e\u003cp\u003eAs part of the Asia Parts Store range for the New Zealand market, this listing is maintained with accurate fitment information so you can check compatibility before ordering. If your specific build, generation or trim level isn't clearly covered in the compatibility details below, it's worth checking your vehicle's VIN or plate details against the listed fitment, or getting in touch for confirmation before you buy, to make sure this part is the right match for your vehicle.\u003c\/p\u003e","brand":"Guangzhou Deliang Auto Technology Co., Ltd.","offers":[{"title":"Default Title","offer_id":54453367996734,"sku":"APS-DL4-1601048857185","price":195.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0948\/1486\/3678\/files\/Sports-Rear-Truck-Door-Sill-Plate-Tailgate.jpg?v=1789434052"},{"product_id":"abs-spare-tire-cover-rear-door-tire-cover-for-jimny-5-door-jb64-jb74-2019-2023-off-road-accessories-1601132970297","title":"Suzuki Jimny JB64 2019–2023 Spare Tyre Cover","description":"\u003cp\u003eThis spare tyre cover is designed to fit Suzuki Jimny (JB64) (2019–2023), protecting the rear-mounted spare wheel from UV exposure, road grime and general weathering, while also giving the back of the vehicle a tidier, more finished appearance compared with an exposed spare tyre.\u003c\/p\u003e\u003cp\u003eConstructed from durable, weather-resistant material designed to handle sustained outdoor exposure without cracking or fading prematurely, this cover is designed as a direct fitment for Suzuki Jimny (JB64) (2019–2023)'s spare wheel size and rear door mounting configuration.\u003c\/p\u003e\u003cp\u003eBeyond protecting the tyre itself from UV degradation, which can shorten a spare tyre's usable life considerably over years of exposure, a properly fitted cover also helps keep the tyre clean and ready for use in the event of a puncture, avoiding a muddy, grime-covered spare when you need it most.\u003c\/p\u003e\u003cp\u003eInstallation is generally straightforward, fitting over the spare wheel and securing with the supplied strap, buckle or clip system depending on the specific design, typically completable within a few minutes without requiring any tools.\u003c\/p\u003e\u003cp\u003eFor Suzuki Jimny (JB64) (2019–2023) owners wanting to protect their spare tyre's condition and give the rear of their vehicle a tidier, more finished appearance, this cover offers a simple, low-cost upgrade with genuine practical benefits over the life of the spare tyre.\u003c\/p\u003e\u003cp\u003ePlease confirm your exact model, generation and year against the compatibility details before ordering, and check your spare wheel's diameter against the cover's sizing to ensure a correct, secure fit.\u003c\/p\u003e\u003cp\u003eAs part of the Asia Parts Store range for the New Zealand market, this listing is maintained with accurate fitment information so you can check compatibility before ordering. If your specific build, generation or trim level isn't clearly covered in the compatibility details below, it's worth checking your vehicle's VIN or plate details against the listed fitment, or getting in touch for confirmation before you buy, to make sure this part is the right match for your Suzuki Jimny.\u003c\/p\u003e\u003ch4\u003eVehicle Compatibility\u003c\/h4\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eTrim\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e2019–2023\u003c\/td\u003e\n\u003ctd\u003eSuzuki\u003c\/td\u003e\n\u003ctd\u003eJimny\u003c\/td\u003e\n\u003ctd\u003eJB64\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Guangzhou Deliang Auto Technology Co., Ltd.","offers":[{"title":"Default Title","offer_id":54453377499454,"sku":"APS-DL4-1601132970297","price":404.97,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0948\/1486\/3678\/files\/H41dbef03a64840b884f6bc1d3fcc7188S.webp?v=1789434348"},{"product_id":"new-arrival-side-doors-cover-body-molding-trims-door-sill-for-ranger-t9-2022-2023-1600563195236","title":"Ford Ranger T9 2022–2023 Door Sill Protector","description":"\u003cp\u003eThis door sill protector kit is designed to fit Ford Ranger (T9) (2022–2023), protecting the vulnerable door sill and lower body panel area from scuffs, scratches and general wear caused by everyday entry and exit, particularly from footwear contact and loading cargo through the door opening.\u003c\/p\u003e\u003cp\u003eConstructed from durable material designed to withstand repeated contact and general weather exposure, this kit is designed as a direct fitment for Ford Ranger (T9) (2022–2023), following the factory sill contours closely for a clean, integrated appearance once installed rather than a generic universal fit.\u003c\/p\u003e\u003cp\u003eInstallation is generally straightforward, using automotive-grade adhesive or the factory clip mounting points depending on the specific kit design, typically completable within an hour with basic tools and without requiring any drilling or permanent modification to the vehicle's body panels.\u003c\/p\u003e\u003cp\u003eBeyond the protective benefit, a well-fitted door sill kit also adds a subtle styling element that many owners find complements the vehicle's overall trim level, helping maintain a clean, well-presented appearance around one of the most frequently contacted areas of the vehicle's exterior.\u003c\/p\u003e\u003cp\u003eFor Ford Ranger (T9) (2022–2023) owners wanting to protect their vehicle's resale value and keep the door sill area looking factory-fresh despite daily use, this kit offers a practical, low-maintenance upgrade that pays off over years of ownership.\u003c\/p\u003e\u003cp\u003ePlease confirm your exact model, generation and year against the compatibility details before ordering, since door sill profiles are specific to each vehicle's body design and door configuration.\u003c\/p\u003e\u003cp\u003eAs part of the Asia Parts Store range for the New Zealand market, this listing is maintained with accurate fitment information so you can check compatibility before ordering. If your specific build, generation or trim level isn't clearly covered in the compatibility details below, it's worth checking your vehicle's VIN or plate details against the listed fitment, or getting in touch for confirmation before you buy, to make sure this part is the right match for your Ford Ranger.\u003c\/p\u003e\u003ch4\u003eVehicle Compatibility\u003c\/h4\u003e\u003ctable border=\"1\" cellpadding=\"6\" cellspacing=\"0\" style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eTrim\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e2022–2023\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003ctd\u003eT9\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Guangzhou Deliang Auto Technology Co., Ltd.","offers":[{"title":"Default Title","offer_id":54453383659838,"sku":"APS-DL4-1600563195236","price":261.27,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0948\/1486\/3678\/files\/H83956953ba66476083b9c784a7e2da35w.webp?v=1789434601"},{"product_id":"gzdl4wd-4wd-decorative-abs-rear-truck-door-sill-protector-plate-for-t9-1601350725225","title":"Door Sill Protector","description":"\u003cp\u003eThis door sill protector kit is designed to fit a wide range of 4x4 and pickup platforms, protecting the vulnerable door sill and lower body panel area from scuffs, scratches and general wear caused by everyday entry and exit, particularly from footwear contact and loading cargo through the door opening.\u003c\/p\u003e\u003cp\u003eConstructed from durable material designed to withstand repeated contact and general weather exposure, this kit is designed as a direct fitment for a wide range of 4x4 and pickup platforms, following the factory sill contours closely for a clean, integrated appearance once installed rather than a generic universal fit.\u003c\/p\u003e\u003cp\u003eInstallation is generally straightforward, using automotive-grade adhesive or the factory clip mounting points depending on the specific kit design, typically completable within an hour with basic tools and without requiring any drilling or permanent modification to the vehicle's body panels.\u003c\/p\u003e\u003cp\u003eBeyond the protective benefit, a well-fitted door sill kit also adds a subtle styling element that many owners find complements the vehicle's overall trim level, helping maintain a clean, well-presented appearance around one of the most frequently contacted areas of the vehicle's exterior.\u003c\/p\u003e\u003cp\u003eFor a wide range of 4x4 and pickup platforms owners wanting to protect their vehicle's resale value and keep the door sill area looking factory-fresh despite daily use, this kit offers a practical, low-maintenance upgrade that pays off over years of ownership.\u003c\/p\u003e\u003cp\u003ePlease confirm your exact model, generation and year against the compatibility details before ordering, since door sill profiles are specific to each vehicle's body design and door configuration.\u003c\/p\u003e\u003cp\u003eAs part of the Asia Parts Store range for the New Zealand market, this listing is maintained with accurate fitment information so you can check compatibility before ordering. If your specific build, generation or trim level isn't clearly covered in the compatibility details below, it's worth checking your vehicle's VIN or plate details against the listed fitment, or getting in touch for confirmation before you buy, to make sure this part is the right match for your vehicle.\u003c\/p\u003e","brand":"Guangzhou Deliang Auto Technology Co., Ltd.","offers":[{"title":"Default Title","offer_id":54453386150206,"sku":"APS-DL4-1601350725225","price":161.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0948\/1486\/3678\/files\/GZDL4WD-4WD-Decorative-ABS-Rear-Truck-Door.webp?v=1789434698"}],"url":"https:\/\/asiapartsstore.com\/collections\/body-trim\/door-sill-protector.oembed","provider":"Asia Parts Store","version":"1.0","type":"link"}