10AN Stainless Steel Braided Hose 1 Metre - Universal Fuel and Oil Cooler Line

Product Overview

This 10AN stainless steel braided hose is a universal line suited to fuel and oil cooler plumbing projects. Sold in a 1 metre length, it gives builders a neat, durable-looking option for custom fluid routing in performance, restoration and project vehicles where a bespoke hose run is needed.

Key Features and Benefits

• 10AN size for compatible AN fittings
• Stainless steel braided outer covering
• 1 metre length that can be cut to suit your layout
• Universal design for fuel line and oil cooler applications
• Clean, professional appearance in the engine bay

Vehicle Compatibility

The supplier lists this hose as universal, with no specific vehicle or engine fitment. As fitment is supplier-stated, please confirm that the 10AN size, length and suitability for your fluid type match your system before ordering. It is the responsibility of the installer to choose matching fittings and confirm the line is suitable for the intended pressure and temperature.

Product Specifications

• Product type: stainless steel braided hose
• Size: 10AN
• Length: 1 metre
• Application: fuel line or oil cooler line, as listed
• Fitment: universal
• Packed size: 5 x 5 x 5 cm
• Packed weight: approximately 0.6 kg

Installation and Usage

Measure your hose run carefully and allow for engine movement before cutting. Use a fine-tooth cutting method and tape the braid to reduce fraying, then assemble with appropriate 10AN hose ends following the fitting manufacturer guidance. Route the line well clear of exhaust heat, sharp edges and moving parts, and secure it with suitable clamps. Pressure-test or leak-check the system before driving, then recheck all joints after the first run.

Package Contents

One 1 metre length of 10AN stainless steel braided hose. Fittings are not listed as included and should be purchased separately.

Important Fitment Notice

If you would like help checking suitability, send us your VIN and project details before ordering. Images are for reference only. Fuel system modifications in New Zealand must be safe and leak-free to pass a Warrant of Fitness, and some changes may require certification, so check with your inspector or a certifier.