2x T10 W5W 168 194 LED Bulbs 24SMD 6500K White Interior License Plate

OVERVIEW

This set of two T10 LED wedge bulbs delivers a bright 6500K white output for a wide range of automotive lighting applications, including interior, map, dome, trunk and license plate lights. Each bulb uses 24SMD 3014 LEDs for high brightness and uniform 360° illumination.

KEY FEATURES

• Set of 2 T10 LED wedge bulbs
• 24SMD 3014 LED chips per bulb for high brightness
• Approx. 240 lm per bulb with 360° beam angle
• 6500K xenon white colour temperature
• Plug-and-play direct replacement for T10 wedge bases
• No UV or IR radiation, low power consumption

COMPATIBLE BULB SIZES

Direct replacement for T10 wedge type bulbs, including (but not limited to):

• T10, W5W, 194, 168, 2825
• 147, 152, 158, 159, 161, 175, 184, 192, 193
• 259, 280, 285, 447, 464, 555, 558, 585
• 655, 656, 657, 1250, 1251, 1252, 2450, 2652
• 2921, 906, 579, 921912

Always confirm your original bulb code and socket type before purchase.

TYPICAL APPLICATIONS

• License plate light
• Map and dome light
• Trunk and cargo area light
• Interior door and courtesy light
• Glove box and stepwell light
• Vanity mirror light
• Clearance, side marker and corner light
• Parking, DRL, reverse, brake and rear fog light (where T10 is used)

Suitable for a wide range of vehicles that use T10/W5W style bulbs (cars, SUVs, utes, trucks, buses, ATVs, etc.).

SPECIFICATIONS

• Base type: T10 / W5W / 168 / 194 / 2825
• LED quantity: 24SMD 3014 per bulb
• Luminous flux: approx. 240 lm per bulb
• Colour temperature: 6500K xenon white
• Voltage: DC 9–18V (24V variant also listed in item specifics)
• Power: approx. 5 W per bulb
• Beam angle: 360°
• Material: aluminium body
• Waterproof rating: IP67 (item specifics also note IP68 dust/water resistance)
• Operating temperature: approx. -40°C to 90°C
• Service life: up to 50,000 hours
• Design: fanless, CANbus compatible (some vehicles may still require a decoder)
• Fitment type: direct replacement

PACKAGE CONTENTS

• 2 x T10 LED wedge bulbs

INSTALLATION & NOTES

• Plug-and-play installation in most vehicles using T10/W5W bulbs.
• Polarity sensitive: if the bulb does not light, remove and rotate 180° then reinsert.
• Some vehicles with sensitive CANbus systems may require an additional decoder (not included).
• Check bulb size, socket type and clearance space before ordering to ensure proper fit.