7075 Aluminum Foot Peg Bracket For Sur-Ron Light Bee for Segway FIX MOD ST

For SUR-RON FIX FOOT PEG MOUNTING BRACKET PACKAGE 7075 BILLET For SEGWAY for SURRON REPAIR MOD
»
» Direct Bolt-On
» Strongest Design
» Surface Finish:Anodized Finish
» Eliminate Foot Peg Failures
» Uses Factory Mounting Hardware
» Replaces Weak OEM Cast Brackets
» Billet Aluminum Foot Peg Mount Support Brace
» Material:CNC Machined from 7075 Aircraft Billet Aluminum
» Won't Fail Like Factory for Sur-Ron Cast Foot Peg Brackets
» Three M14x1.25 Threaded Holes on the bottom of each peg bracket
» Dependable Replacement Foot Peg Mounting Brackets for Sur-Ron MX
» 1 Pair = 1 Left Peg Bracket and 1 Right Peg Bracket
» Package : 1 Pair Peg Bracket and 1 pc bracket

» Installed picture on a bike that makes power with a nucular 24F controller
» See pictures of the weak cast frame bending as they come from the factory
» Forged Foot Peg Mounting Bracket and Support Brace Eliminate Frame and Peg Failures
» Installation might require the kick stand hole to be reamed due to factory bolt size variations

Description:
Best Replacement Billet Foot Peg Mounting Brackets for Sur-Ron MX
electric bike made from 7075 aluminum. These billet brackets replace
the weak oem cast brackets that are known to fail.

Includes Foot Peg Support Brace to protect against all jumping, hard riding and against general fatigue that the cast foot peg brackets suffer from.
Does not include kickstand and simply uses all factory parts to swap over for ease of installation.

Installation Tip:
Be sure to always use anti-seize when installing the  Billet Foot Peg
Mounting Brackets and Support Brace System. This will allow the frame to be evenly pulled back into place when tightening as its very common for the frames to be bent inward causing a gap when trying to install the mounting brackets.

The anti-seize will ensure a smooth thread operation and allows the bolts to be turned easily without extra stress. Be sure to tighten each side evenly so it pulls the frame peg mounts back out to the original location.
Some times one side will be bent more than the other as people have a tendency to lean to one side more than the other.

Once you have gotten the frame to contact the billet mount bracket surface evenly and have the support brace installed you are done.
As long as you take your time and go slow and with returning the frame back to its original location
you will have brought your frame back to 100% and boxed it properly with the new mounts and support brace eliminating this from happening ever again.

* Never grab the kickstand and try and bend the mount to get the kickstand from contacting the swingarm. The kickstand is hitting the swingarm because the mounting bolt location in the frame is bent and that is the main reason the support brace was designed to correct this problem.