Front Left Electric Window Lift Motor for Toyota Landcruiser J80 1990-1998

PRODUCT OVERVIEW

This front left electric window lift motor is a high-quality aftermarket replacement designed for precise fit and reliable operation.

KEY FEATURES

• Direct-fit replacement electric window lift motor
• Front left (front passenger side) position
• 2-pin motor connector
• Brand new, high-quality aftermarket construction
• Supplied as a single piece

SPECIFICATIONS

• Product: Window lift motor
• Operating mode: Electric
• Placement on vehicle: Front left (front passenger side)
• Connector: 2 pins
• Part type: High quality aftermarket
• Condition: Brand new
• MPN/Item No.: 100111MF
• Quantity supplied: 1 piece
• Manufacturer warranty: 1 year (part only)

VEHICLE COMPATIBILITY

• Toyota Landcruiser J80 05/1990 - 03/1998

Always compare the part number, connector type, and mounting points with your original motor before purchase.

ANTI-PINCH FUNCTION SETUP (IF APPLICABLE)

If the vehicle is equipped with an anti-pinch one-touch window function, follow these guidelines after installation:

• Do not test the motor before it is installed in the door, otherwise the anti-pinch function may require resetting.
• Install the motor and connect it to the one-touch window switch.
• Operate the switch to confirm the window travels fully to the top.
• If the window drops after reaching the top, perform the reset procedure below.

ANTI-PINCH RESET PROCEDURE

• Step 1: Pull the window switch briefly so the window moves slightly up to the top position.
• Step 2: Hold the one-touch switch in the up position for 3–5 seconds at the top.
• Step 3: Press the window switch briefly so the window moves slightly down to the bottom position.
• Step 4: Hold the one-touch switch in the down position for 3–5 seconds at the bottom.
• Step 5: Pull the one-touch switch again to move the window fully to the top and confirm it no longer drops.

If the window still drops after reaching the top, repeat the reset steps until the anti-pinch function is correctly calibrated.

IMPORTANT NOTES

• This product is intended for vehicle repair and replacement purposes.
• Images are for reference; product colour may vary slightly due to screen and lighting differences.
• Always match the product images, specifications, and connector style to your original part before ordering.
• For best results and to maintain warranty coverage, installation by a qualified automotive mechanic is recommended.