Front Left 6-Pin Window Regulator Motor for Mazda 2 3 6 CX-5

PRODUCT OVERVIEW

This high-quality aftermarket electric window lift motor is designed to restore smooth, reliable power window operation on the left-hand (passenger) side of compatible Mazda vehicles. Supplied as a single, brand new unit.

KEY FEATURES

• Electric window lift motor
• 6-pin motor connector
• Suitable for front left and specified rear left applications
• High-quality aftermarket replacement part
• Supplied as 1 piece, brand new

SPECIFICATIONS

• Product: Window lift motor
• Operating mode: Electric
• Placement on vehicle: Front left or rear left (passenger side, as specified per model)
• Motor connector: 6 pins
• Condition: Brand new
• Part type: High quality aftermarket
• MPN / Item No.: 101404M6B
• Quantity supplied: 1 piece
• Manufacturer warranty: 1 year (part only)

VEHICLE COMPATIBILITY

Use this list as a guide only. Always match the plug type, mounting points and part number to your original motor before purchase.

• Mazda 2 DE 07/2007–12/2014 (front left)
• Mazda 3 BL 01/2009–11/2013 (front left)
• Mazda 6 GH 09/2007–12/2012 (front left)
• Mazda 6 GJ/GL 10/2012–on (front left or rear left)
• Mazda CX-5 KE 01/2012–02/2017 (rear left)

ANTI-PINCH FUNCTION SETUP

This motor is suitable for systems with an anti-pinch (one-touch) function. Do not power-test the motor before it is installed in the door, or the anti-pinch setting may be lost.

• Install the motor and connect it to the one-touch window switch.
• Operate the switch: the window should travel fully up without dropping.
• If the window drops after reaching the top, perform a reset as below.

ANTI-PINCH RESET PROCEDURE

• Step 1: Pull the window switch briefly to move the glass slightly up to the top position.
• Step 2: Hold the one-touch switch up for 3–5 seconds at the top.
• Step 3: Press the window switch briefly to move the glass slightly down to the bottom.
• Step 4: Hold the one-touch switch down for 3–5 seconds at the bottom.
• Step 5: Pull the one-touch switch to raise the window fully to the top.

The reset is complete if the window remains at the top. If it drops again, repeat the procedure until successful.

INSTALLATION & NOTES

• Intended as a replacement part for repair of an existing window regulator system.
• Professional installation by a qualified automotive mechanic is strongly recommended.
• Images are for reference; colour/finish may vary slightly due to lighting and screen settings.
• Always compare the product photos, plug type and mounting pattern with your original motor before ordering.

WARRANTY SUMMARY

• 12-month manufacturer-style warranty on the part only, from delivery date.
• Warranty covers replacement of a defective part after inspection.
• Labour, installation costs and consequential damage are not covered.
• Parts must not be modified, tampered with or incorrectly installed.