Front Left Electric Window Regulator (No Motor) 9221X7 for Ducato/Jumper/Boxer

PRODUCT OVERVIEW

This high-quality aftermarket electric window regulator is designed for the front left (front passenger side) door. It is supplied without motor and is a direct replacement for OE reference 9221X7.

KEY FEATURES

• Application: Front left (front passenger side) door
• Operating mode: Electric
• Motor: Not included (regulator mechanism only)
• OE reference number: 9221X7
• MPN/Item No.: 101388
• Construction: High quality aftermarket replacement
• Condition: Brand new
• Quantity supplied: 1 piece
• Manufacturer warranty: 1 year (part only)

VEHICLE FITMENT

• Fiat Ducato 02/2007 - On
• Citroen Jumper 2006 - On
• Peugeot Boxer 2006 - On

Use OE reference 9221X7 and compare the product images with your original part to confirm compatibility before purchase.

ANTI-PINCH MOTOR RESET NOTE

For vehicles equipped with window motors featuring an anti-pinch (one-touch) function, correct setup is essential for proper operation. Do not test the motor before it is installed in the door, otherwise the anti-pinch function may fail and require resetting.

ANTI-PINCH RESET PROCEDURE

• Step 1: Pull the window switch briefly to move the glass slightly up to the top position.
• Step 2: Hold the one-touch switch up for 3–5 seconds when the window is fully closed.
• Step 3: Press the window switch briefly to move the glass slightly down to the bottom position.
• Step 4: Hold the one-touch switch down for 3–5 seconds when the window is fully open.
• Step 5: Pull the one-touch switch to move the window up to the top and check that it no longer drops back down.

If the window still drops after reaching the top, repeat the reset steps until the anti-pinch function operates correctly.

INSTALLATION & QUALITY NOTICE

• Intended for repair and replacement of existing window regulator assemblies.
• Professional installation by a qualified automotive technician is strongly recommended.
• Product images are representative of the actual item supplied; colour or finish may vary slightly due to lighting and screen settings.
• Always match mounting points, connector style (for the motor you will reuse), and general layout to your original part.