Front Left Electric Window Regulator w/ Motor for Mitsubishi Outlander ZG ZH

PRODUCT OVERVIEW

This front left electric window regulator with 2-pin motor is a high-quality aftermarket replacement designed to restore smooth and reliable window operation.

KEY FEATURES

• Direct electric window regulator assembly with motor
• Front left (front passenger side) position
• 2-pin motor connection
• High quality aftermarket construction
• Supplied brand new as a single piece
• 12-month manufacturer warranty (part only)

SPECIFICATIONS

• Product: Window regulator
• Operating mode: Electric
• Placement on vehicle: Front left (front passenger side)
• Motor type: 2 pins
• Part specs: High quality aftermarket
• Condition: Brand new
• MPN/Item No.: 102131M2D
• Warranty: 1 year (part only)
• Quantity supplied: 1 piece

FITMENT

• Mitsubishi Outlander ZG 10/2006 – 08/2009
• Mitsubishi Outlander ZH 09/2009 – 11/2012

Compare the part number and images with your original regulator to confirm compatibility before purchase.

ANTI-PINCH FUNCTION SETUP

If your vehicle uses an anti-pinch window system, correct setup after installation is essential.

• Do not power-test the motor before it is installed in the door.
• Install the regulator and connect it to the one-touch window switch.
• Pull the switch up to raise the window fully. If the window drops after reaching the top, reset is required.

Reset procedure:

• Step 1: Pull the window switch briefly to move the glass slightly up to the top.
• Step 2: Hold the one-touch switch up for 3–5 seconds at the top position.
• Step 3: Press the switch briefly to move the window slightly down to the bottom.
• Step 4: Hold the one-touch switch down for 3–5 seconds at the bottom position.
• Step 5: Pull the one-touch switch to raise the window fully and confirm it stays at the top.

If the window still drops after reaching the top, repeat the reset steps until the function is correctly set.

INSTALLATION & NOTES

• Professional installation by a qualified automotive mechanic is strongly recommended.
• Check plug type, mounting points and rail design against your original part.
• Product images are for reference; colour or finish may vary slightly due to lighting and screen settings.