Front Left Electric Window Regulator with Motor for Nissan Qashqai J11

PRODUCT OVERVIEW

Front left electric window regulator with integrated 2-pin motor, designed as a high-quality aftermarket replacement for Nissan Qashqai J11 models.

KEY FEATURES

• Complete assembly: regulator with pre-fitted electric motor
• Front left (front passenger side) fitment
• 2-pin motor connection
• High quality aftermarket construction
• Brand new unit supplied as a single piece
• 12-month warranty (part only)

SPECIFICATIONS

• Product: Window regulator
• Operating mode: Electric
• Placement on vehicle: Front left (front passenger side)
• Motor type: 2-pin
• Part specs: High quality aftermarket
• Condition: Brand new
• MPN / Item No.: 100736
• Warranty: 1 year (part only)
• Quantity supplied: 1 piece

VEHICLE FITMENT

• Nissan Qashqai J11 (07/2014 - 08/2021)

Always visually compare the new regulator with your original part and confirm plug type and mounting points before purchase.

ANTI-PINCH FUNCTION SETUP

This regulator motor is compatible with one-touch anti-pinch window systems. Do not operate or test the motor before it is installed in the door, or the anti-pinch function may require resetting.

RESET PROCEDURE (IF REQUIRED)

• Step 1: With the glass fully up, pull the window switch briefly so the window moves slightly up against the top stop.
• Step 2: Hold the one-touch switch in the up position for 3–5 seconds at the top.
• Step 3: Press the switch briefly so the window moves slightly down to the bottom stop.
• Step 4: Hold the one-touch switch in the down position for 3–5 seconds at the bottom.
• Step 5: Pull the one-touch switch to raise the window fully and check that it no longer drops after reaching the top.

If the window still drops after reaching the top, repeat the above steps until the anti-pinch function is correctly set.

INSTALLATION & NOTES

• Professional installation by a qualified automotive technician is recommended.
• Intended as a replacement part for repair and restoration purposes.
• Product images are for reference only; colour and finish may vary slightly due to lighting and screen settings.
• Ensure plug type, mounting locations and cable routing match your original assembly before fitting.