Front Left Electric Window Regulator with Motor for Mini Cooper R50 R52 R53

PRODUCT OVERVIEW

This front left electric window regulator with motor is a high-quality aftermarket replacement designed for selected Mini Cooper R50, R52 and R53 models. Supplied as a complete assembly with motor, it restores smooth and reliable window operation.

KEY FEATURES

• Complete window regulator assembly with motor
• Electric operation with 2-pin motor connection
• Direct-fit replacement for the front left (front passenger side)
• Manufactured to high aftermarket quality standards
• Supplied brand new with 1-year parts warranty

SPECIFICATIONS

• Product: Window regulator with motor
• Operating mode: Electric
• Placement on vehicle: Front left (front passenger side)
• Motor connection: 2 pins
• OE reference number: 51337039451
• Part type: High quality aftermarket
• Condition: Brand new
• MPN / Item No.: 100552
• Warranty: 1 year (part only)
• Quantity supplied: 1 piece

VEHICLE COMPATIBILITY

• Mini Cooper R50 2001–2006
• Mini Cooper R52 2004–2005
• Mini Cooper S R52 2004–2005
• Mini Cooper S R53 2002–2005

Use the OE reference number and compare the product images with your original part to confirm suitability before purchase.

ANTI-PINCH FUNCTION – SETUP & RESET

This window regulator motor is compatible with anti-pinch / one-touch functionality. Correct setup is essential for proper operation.

• Do not test the motor before it is installed in the door, or the anti-pinch function may require resetting.
• The motors are tested and set correctly prior to supply.
• Install the motor, connect it to the one-touch window switch and operate the switch to raise the window fully.
• If the window drops after reaching the top stop, perform the reset procedure below.

Reset procedure:

• Step 1: Pull the window switch briefly to move the glass slightly up to the top position.
• Step 2: Hold the one-touch switch up for 3–5 seconds at the top.
• Step 3: Press the window switch briefly to move the glass slightly down to the bottom.
• Step 4: Hold the one-touch switch down for 3–5 seconds at the bottom.
• Step 5: Pull the one-touch switch to raise the window fully and check that it no longer drops.

If the window still drops after reaching the top, repeat the reset steps until the anti-pinch function is correctly set.

IMPORTANT NOTES

• This part is intended for repair and replacement use.
• Product images are for reference; colour or finish may vary slightly due to screen and lighting.
• Always match the connector type, mounting points and OE reference number with your original unit.
• For best results and warranty validity, installation by a qualified automotive technician is recommended.