Front Left Electric Window Regulator 6-Pin Motor for Toyota Kluger 2013-2019

PRODUCT OVERVIEW

This front left electric window regulator with 6-pin motor is a high-quality aftermarket replacement, designed for reliable operation and direct fitment to the specified Toyota Kluger applications.

KEY FEATURES

• Complete electric window regulator with integrated motor
• 6-pin motor connection for correct electrical interface
• Front left (front passenger side) fitment
• High-quality aftermarket construction
• Brand new part supplied as a single piece

SPECIFICATIONS

• Product: Window regulator
• Operating mode: Electric
• Placement on vehicle: Front left (front passenger side)
• Motor connector: 6 pins
• Part type: High quality aftermarket
• Condition: Brand new
• MPN / Item No.: 102190M6D
• Warranty: 1 year (part only)
• Quantity supplied: 1 piece

FITMENT

• Toyota Kluger GSU50 12/2013 – 11/2019

Always visually compare this regulator and connector style with the original part in your vehicle before purchase.

ANTI-PINCH FUNCTION SETUP

This window motor is equipped with an anti-pinch safety function. Correct setup is essential for proper operation.

• Do not test the motor before it is installed in the door, or the anti-pinch function may require resetting.
• Install the motor and connect it to the one-touch window switch before operating.
• After installation, pull the switch up; the window should travel fully to the top.
• If the window drops slightly after reaching the top, perform the reset procedure below.

ANTI-PINCH RESET PROCEDURE

• Step 1: Pull the window switch briefly to move the glass slightly up to the top position.
• Step 2: Hold the one-touch switch in the up position for 3–5 seconds at the top.
• Step 3: Press the switch briefly to move the window slightly down to the bottom position.
• Step 4: Hold the one-touch switch down for 3–5 seconds at the bottom.
• Step 5: Pull the one-touch switch to move the window fully up to the top and check that it no longer drops.

If the window still drops after reaching the top, repeat the reset steps until the function is correctly set.

INSTALLATION & WARRANTY NOTES

• For best results and to maintain warranty coverage, installation by a qualified automotive mechanic is recommended.
• This part is intended for repair and replacement use only.
• Product images are for reference; colour or finish may vary slightly due to screen and lighting differences.
• Seals and labels on window regulators and motors should not be removed, as this may affect return eligibility.

Inspect the part before installation and contact your seller if there are any issues prior to fitting.