Front Left Window Regulator with 2-Pin Motor for Ford Falcon FG FGX

PRODUCT OVERVIEW

This electric window regulator is designed for the front left (front passenger side) door and is supplied with a pre-fitted 2-pin motor. It is a high-quality aftermarket replacement suitable for specified Ford Falcon applications and is supplied as a brand-new single unit.

KEY FEATURES

• Complete window regulator assembly with electric motor (2-pin connector)
• Direct replacement for damaged, worn or non-operational window regulators
• High-quality aftermarket construction for reliable long-term performance
• Supplied brand new with 1-year manufacturer warranty (part only)
• Includes 1 x front left window regulator assembly

SPECIFICATIONS

• Product type: Window regulator with motor
• Operating mode: Electric
• Placement on vehicle: Front left (front passenger side)
• Motor connector: 2 pins
• OE reference number: BGF23201A
• Part specification: High-quality aftermarket replacement
• Condition: Brand new
• MPN / Item number: 100065D
• Manufacturer warranty: 1 year (part only)
• Quantity supplied: 1 piece

VEHICLE COMPATIBILITY

• Ford Falcon FG 02/2008 - 09/2014
• Ford Falcon FGX 10/2014 - 2016

Use the OE reference number BGF23201A and compare the product images, plug type and mounting points with your original part to confirm compatibility before purchase.

ANTI-PINCH FUNCTION SETUP (IF APPLICABLE)

If your vehicle uses a window motor with anti-pinch and one-touch function, the system may require resetting after installation.

• Do not test the motor before it is fully installed in the door, as the anti-pinch function may fail.
• Install the motor and connect it to the one-touch window switch, then raise the window fully.
• If the window drops after reaching the top, follow the reset procedure below.

Reset procedure:

• Step 1: Pull the window switch briefly to move the glass slightly up to the top position.
• Step 2: Hold the one-touch switch up for 3–5 seconds at the top.
• Step 3: Press the switch briefly to move the window slightly down to the bottom.
• Step 4: Hold the one-touch switch down for 3–5 seconds at the bottom.
• Step 5: Pull the one-touch switch to raise the window to the top and check that it no longer drops.

If the window still drops at the top, repeat the steps until the anti-pinch function is correctly set.

IMPORTANT NOTES

• Intended for repair and replacement purposes only.
• Colours in images may vary slightly due to screen and lighting differences.
• Always match plug type, mounting points and OE reference with your original part before ordering.
• Installation by a qualified automotive technician is strongly recommended to maintain warranty and ensure correct operation.