Front Left Electric Window Regulator & Motor 2-Pin for Subaru Forester SH

PRODUCT OVERVIEW

This front left electric window regulator with integrated 2-pin motor is a high quality aftermarket replacement, designed to restore smooth power window operation on compatible Subaru Forester SH models.

KEY FEATURES

• Complete assembly: window regulator with pre-fitted electric motor
• Front left (front passenger side) position
• 2-pin motor connection
• High quality aftermarket construction
• Brand new part supplied as a single piece

SPECIFICATIONS

• Product: Window regulator with motor
• Operating mode: Electric
• Placement on vehicle: Front left (front passenger side)
• Motor: 2 pins
• Part specs: High quality aftermarket
• Condition: Brand new
• MPN / Item No.: 101735I
• Warranty: 1 year (part only)
• Quantity supplied: 1 piece

FITMENT

• Subaru Forester SH 03/2008 - 01/2013

Always compare the part visually and match the specifications (position, plug type, and mounting points) with your original regulator before purchase.

ANTI-PINCH FUNCTION SETUP (IF APPLICABLE)

If your vehicle uses an anti-pinch one-touch window function, the motor must be correctly initialised after installation. Do not operate or test the motor before it is mounted in the door, as this can cause the anti-pinch calibration to fail.

RESET PROCEDURE (GENERAL GUIDE)

• Step 1: With the regulator installed, pull the window switch briefly to move the glass fully to the top.
• Step 2: Hold the one-touch switch in the up position for 3–5 seconds at the top.
• Step 3: Press the switch briefly to move the glass fully to the bottom.
• Step 4: Hold the one-touch switch in the down position for 3–5 seconds at the bottom.
• Step 5: Pull the one-touch switch again to move the window to the top and confirm it no longer drops back down.

If the window still drops after reaching the top, repeat the reset steps until the anti-pinch function operates correctly. Always follow the vehicle-specific service information where available.

INSTALLATION & WARRANTY NOTES

• Professional installation by a qualified automotive mechanic is recommended.
• This part is intended as a replacement component for repair and maintenance.
• Colour or finish may appear slightly different on screen due to lighting and display settings.
• For regulators with motors, do not remove any tamper-evident labels or seals, as this may affect return eligibility.