Front Left Electric Window Regulator with Motor 2-Pin for Corolla AE112

PRODUCT OVERVIEW

This front left electric window regulator with integrated 2-pin motor is a high-quality aftermarket replacement, supplied as a complete assembly for easy installation.

KEY FEATURES

• Complete window regulator with electric motor
• Front left (front passenger side) position
• 2-pin motor connection
• High quality aftermarket construction
• Brand new unit – not reconditioned
• Supplied as 1 piece

SPECIFICATIONS

• Product: Window regulator
• Operating mode: Electric
• Placement on vehicle: Front left (front passenger side)
• Motor: 2 pins
• Condition: Brand new
• Part specs: High quality aftermarket
• MPN / Item No.: 101170D
• Quantity supplied: 1 piece
• Manufacturer warranty: 1 year (part only)

FITMENT

• Toyota Corolla AE112 1997–2002

Always compare the product images, connector type and mounting points with your original part before purchase.

ANTI-PINCH FUNCTION SETUP

If your vehicle uses an anti-pinch one-touch window system, the motor may require resetting after installation. Do not operate or test the motor outside the door, as this can affect the anti-pinch calibration.

General reset procedure (if required):

• Raise the window fully to the top position.
• Hold the window switch in the "up" position for 3–5 seconds.
• Lower the window fully to the bottom position.
• Hold the switch in the "down" position for 3–5 seconds.
• Raise the window again and confirm it stays at the top.

Repeat the steps if the window drops after reaching the top. Refer to the vehicle’s service information for model-specific procedures.

INSTALLATION & WARRANTY NOTES

• Professional installation by a qualified automotive mechanic is recommended.
• Part is intended as a replacement component for repair purposes.
• Colour/finish may vary slightly due to lighting and screen settings.
• For units with seals or labels on plugs and motor housings, do not remove or tamper with these, as this may affect return eligibility.

Ensure all fasteners are correctly tightened and the glass is aligned and moves smoothly through the full travel range after installation.