Front Left Electric Window Regulator (No Motor) for Mazda CX-7 ER 2006-2012

PRODUCT OVERVIEW

This front left electric window regulator is a high-quality aftermarket replacement designed for Mazda CX-7 ER models. It is supplied without a motor and is suitable for vehicles requiring a brand new regulator assembly on the front passenger side.

KEY FEATURES

• Direct-fit electric window regulator
• Front left (front passenger side) position
• Motor not included – reuse existing motor or purchase separately
• High-quality aftermarket construction
• Brand new part, not reconditioned
• Supplied as 1 piece
• 1-year parts-only warranty

SPECIFICATIONS

• Product type: Window regulator
• Operating mode: Electric
• Placement on vehicle: Front left (front passenger side)
• Motor: Not included
• Condition: Brand new
• Part specification: High quality aftermarket
• MPN / Item No.: 100693I
• Quantity supplied: 1 piece
• Warranty: 1 year (part only)

FITMENT

• Mazda CX-7 ER 09/2006 – 12/2012

Always match the regulator design and mounting points to your original part before purchase.

ANTI-PINCH MOTOR SETUP (IF APPLICABLE)

If using a motor with anti-pinch and one-touch function, correct setup is essential for proper operation.

• Do not test the motor before it is installed in the door, or the anti-pinch function may fail.
• Install the motor on the regulator and connect it to the one-touch window switch.
• Pull the switch up and check that the window travels fully to the top.
• If the window goes up then drops down at the top, perform a reset of the anti-pinch function.

Anti-pinch reset procedure:

• Step 1: Pull the window switch briefly so the glass moves slightly up to the top.
• Step 2: Hold the one-touch switch up for 3–5 seconds at the top position.
• Step 3: Press the window switch briefly so the glass moves slightly down to the bottom.
• Step 4: Hold the one-touch switch down for 3–5 seconds at the bottom position.
• Step 5: Pull the one-touch switch to raise the window fully to the top and confirm it stays in position.

If the window still drops after reaching the top, repeat the reset steps until the function is correctly set.

INSTALLATION & NOTES

• Professional installation by a qualified automotive mechanic is strongly recommended.
• Intended for repair and replacement of a faulty original regulator.
• Product images are for reference; colour/finish may vary slightly due to lighting and screen settings.
• Verify compatibility with your vehicle by comparing the existing part and mounting points.