Front or Rear Left Window Lift Motor for Mitsubishi Lancer CG/CH

Product Overview

This electric window lift motor is a high-quality aftermarket replacement designed for the left side of Mitsubishi Lancer CG and CH models. It is suitable for use in either the front left or rear left passenger door where applicable.

Key Features

• Direct-fit electric window lift motor
• Suitable for front or rear left (passenger side) position
• 2-pin motor connector for plug-and-play installation
• High-quality aftermarket construction for reliable operation
• Supplied brand new, not reconditioned
• 12-month manufacturer parts warranty
• Supplied as 1 piece (motor only)

Specifications

• Product: Window lift motor
• Operating mode: Electric
• Placement on vehicle: Front or rear left (passenger side)
• Connector: 2-pin
• Part specification: High-quality aftermarket
• Condition: Brand new
• MPN/Item No.: 100079
• Manufacturer warranty: 1 year (part only)
• Quantity supplied: 1 piece

Vehicle Fitment

• Mitsubishi Lancer CG 07/2002 – 07/2003
• Mitsubishi Lancer CH 08/2003 – 12/2008

Use the part number and product images to confirm compatibility with your original motor before purchase.

Anti-Pinch Function Reset (Where Applicable)

For window regulator motors with an anti-pinch (one-touch) safety function, follow these guidelines:

• Do not power-test the motor before it is installed in the door, or the anti-pinch function may need to be reset.
• Motors are tested and set correctly before dispatch; install and connect to the one-touch window switch to verify operation.
• If the window drops slightly after reaching the top position, perform the reset procedure below.

Reset procedure:

• Step 1: Pull the window switch briefly so the window moves up slightly to the top.
• Step 2: Hold the one-touch switch in the up position for 3–5 seconds at the top.
• Step 3: Press the switch briefly so the window moves slightly down to the bottom.
• Step 4: Hold the one-touch switch in the down position for 3–5 seconds at the bottom.
• Step 5: Pull the one-touch switch to raise the window fully to the top and check that it no longer drops.

If the window still drops after reaching the top, repeat the reset steps until successful.

Installation & Notes

• Professional installation by a qualified automotive mechanic is strongly recommended.
• Compare the plug type, mounting points and overall shape with your original motor before fitting.
• Images are provided as a guide; colour or finish may vary slightly due to lighting and screen settings.
• This motor is intended as a replacement part for repair and maintenance purposes.