Front Right 6-Pin Power Window Regulator & Motor for Prado J120 02-09

PRODUCT OVERVIEW

This front right electric window regulator with 6-pin motor is a high-quality aftermarket replacement designed for reliable power window operation. Supplied as a complete assembly for straightforward installation.

KEY FEATURES

• Complete power window regulator with motor assembly
• Electric operation with 6-pin connector motor
• Front right (driver side) door position
• High quality aftermarket construction
• Brand new part, supplied as 1 piece
• Backed by 1-year parts warranty

SPECIFICATIONS

• Product: Window regulator with motor
• Operating mode: Electric
• Position: Front right (front driver side)
• Motor: 6 pins
• Part specs: High quality aftermarket
• Condition: Brand new
• MPN/Item No.: 101504E
• Warranty: 1 year (part only)
• Quantity supplied: 1 piece

FITMENT DETAILS

Use this list as a guide only. Always match part number, plug type and images to your original unit before purchase.

• Toyota Landcruiser Prado J120 10/2002 - 08/2009
• Toyota FJ Cruiser GSJ15R 03/2011 - 12/2016 1GRFE 4.0L Wagon
• Lexus GX470 UZJ120
• Toyota 4Runner GRN210, GRN215, KZN215, UZN210, UZN215
• Toyota Alphard ANH10, ANH10W, ANH15, ANH15W, ATH10, ATH10W, MNH10, MNH10W, MNH15, MNH15W
• Toyota Hilux Surf GRN215, GRN215W, KDN215, KDN215W, RZN210, RZN210W, TRN210, TRN210W, TRN215, TRN215W, VZN210, VZN210W, VZN215, VZN215W

ANTI-PINCH FUNCTION SETUP

If the motor is equipped with an anti-pinch function, it must be correctly set after installation. Do not power the motor before it is mounted in the door, or the anti-pinch function may require resetting.

• Install the motor and connect it to the one-touch window switch.
• Operate the switch to raise the window. If it reaches the top and then drops, reset is required.

Reset procedure:

• Step 1: Pull the window switch briefly to move the glass fully to the top.
• Step 2: Hold the one-touch switch up for 3–5 seconds at the top position.
• Step 3: Press the switch briefly to move the window fully to the bottom.
• Step 4: Hold the one-touch switch down for 3–5 seconds at the bottom position.
• Step 5: Pull the one-touch switch to move the window up to the top and confirm it no longer drops.

Repeat the reset steps if the window still drops after reaching the top.

INSTALLATION & WARRANTY NOTES

• Intended for use as a replacement part for repair purposes.
• Professional installation by a qualified automotive mechanic is strongly recommended.
• Images are for reference; colour or finish may differ slightly due to screen and lighting.
• Match connector type, mounting points and overall design with the original regulator before ordering.
• Tamper-evident seals on plugs or motor housings (if present) should not be removed, as this may affect return eligibility.