Front Right Electric Window Regulator with 6‑Pin Motor for Mazda 2 DJ/DL

PRODUCT OVERVIEW

This front right electric window regulator is a high-quality aftermarket replacement supplied complete with a 6-pin motor. It is designed for Mazda 2 DJ/DL models from 08/2014 to current with VIN prefix NMO.

KEY FEATURES

• Direct-fit front right (driver side) window regulator assembly
• Integrated 6-pin electric motor
• High-quality aftermarket construction
• Brand new part, supplied as a single piece
• 12-month manufacturer warranty (part only)

SPECIFICATIONS

• Product type: Window regulator
• Operating mode: Electric
• Placement on vehicle: Front right (driver side)
• Motor connection: 6 pins
• Part specification: High-quality aftermarket
• Condition: Brand new
• MPN/Item No.: 102262M6B
• Quantity supplied: 1 piece
• Manufacturer warranty: 1 year (part only)

FITMENT

• Mazda 2 DJ/DL 08/2014 - Current, VIN prefix NMO (front right / driver side)

Always compare the part number and product images with your original regulator and motor before purchase.

ANTI-PINCH FUNCTION SETUP

This regulator motor is equipped with an anti-pinch safety function. Do not test the motor before it is installed in the door, as this may cause the anti-pinch function to fail and require resetting.

• The motors are pre-tested and pre-set before dispatch.
• Install the motor, connect it to the one-touch window switch and raise the window fully.
• If the window drops after reaching the top, perform the reset procedure below.

ANTI-PINCH RESET PROCEDURE

• Step 1: Pull the window switch briefly to move the window slightly up to the top position.
• Step 2: Hold the one-touch switch up for 3–5 seconds at the top.
• Step 3: Press the window switch briefly to move the window slightly down to the bottom position.
• Step 4: Hold the one-touch switch down for 3–5 seconds at the bottom.
• Step 5: Pull the one-touch switch to raise the window fully to the top.

The reset is complete if the window remains at the top. If it drops again, repeat the procedure until successful.

INSTALLATION & WARRANTY NOTES

• For best results and to maintain warranty coverage, installation by a qualified automotive mechanic is recommended.
• This part is intended for repair and replacement use.
• Product colour and finish may vary slightly from images due to screen settings and lighting.
• Some window regulators and motors may use tamper-evident seals; do not remove these unless instructed, as this can affect return eligibility.

This is an aftermarket replacement component and is not manufactured by or affiliated with the original vehicle manufacturer. Any OEM names or references, if present, are used for identification and compatibility purposes only.