Front Right Electric Window Regulator with 2-Pin Motor for Hyundai i20 PB

Product Overview

This front right electric window regulator is a high-quality aftermarket replacement supplied complete with a 2-pin motor. It is designed to restore smooth, reliable window operation on compatible Hyundai i20 PB models.

Key Features

• Complete electric window regulator assembly with motor
• Front right position (front driver side)
• 2-pin motor connection for correct electrical interface
• Brand new, high-quality aftermarket part
• Supplied as a single piece for one window

Specifications

• Product: Electric window regulator assembly
• Operating mode: Electric
• Placement on vehicle: Front right (front driver side)
• Motor type: 2-pin connector
• Condition: Brand new
• Part type: High-quality aftermarket replacement
• MPN / Item No.: 101401M2D
• Quantity supplied: 1 piece
• Warranty: 1 year (part only)

Fitment

• Hyundai i20 PB 04/2009 – 10/2015

Fitment information is provided as a guide only. Always compare the part number, connector type, and product images with your original component before purchase.

Anti-Pinch Function Setup (If Applicable)

Some electric window motors include an anti-pinch safety function. Incorrect testing before installation can cause the function to fail and require resetting.

• Do not test the motor before it is fully installed in the door.
• Install the motor and connect it to the one-touch window switch.
• Pull the switch up to raise the window. If it goes up and stays at the top, setup is correct.
• If the window drops after reaching the top, perform the reset steps below.

Anti-Pinch Reset Procedure

• Step 1: Pull the window switch briefly so the window moves slightly up to the top.
• Step 2: Hold the one-touch switch up for 3–5 seconds with the window at the top.
• Step 3: Press the switch briefly so the window moves slightly down to the bottom.
• Step 4: Hold the one-touch switch down for 3–5 seconds with the window at the bottom.
• Step 5: Pull the one-touch switch to raise the window fully to the top and check that it no longer drops.

If the window still drops after reaching the top, repeat the reset procedure until the anti-pinch function is correctly set.

Important Information

• Part is intended for repair and replacement use.
• Images are for reference only; colour and finish may vary slightly due to screen and lighting.
• Always match the product images and specifications to your original part before ordering.
• Installation by a qualified automotive technician is recommended to ensure correct operation and to protect warranty coverage.