Front Right Electric Window Regulator (No Motor) for Mercedes Vito W639

PRODUCT OVERVIEW

This front right electric window regulator is a high-quality aftermarket replacement designed to restore smooth window operation. Supplied without motor, it is compatible with the original motor and switch system.

KEY FEATURES

• Electric window regulator assembly (no motor included)
• Front right position (front driver side)
• Direct-fit replacement for OE reference 6397200146
• High quality aftermarket construction
• Supplied brand new as a single piece
• Backed by 1-year part-only warranty

SPECIFICATIONS

• Product: Window regulator
• Operating mode: Electric
• Placement on vehicle: Front right (front driver side)
• Motor: Not included
• OE reference number: 6397200146
• Part type: High quality aftermarket
• Condition: Brand new
• MPN/Item No.: 100662
• Manufacturer warranty: 1 year (part only)
• Quantity supplied: 1 piece

VEHICLE COMPATIBILITY

• Mercedes-Benz Vito W639 (09/2003 – 08/2015)

Use the OE reference number and product photos to confirm compatibility with your existing regulator before purchase.

ANTI-PINCH FUNCTION – IMPORTANT NOTE

If your vehicle uses a motor with anti-pinch and one-touch function, follow the correct reset procedure after installation to ensure proper operation.

• Do not test the motor before it is installed in the door, otherwise the anti-pinch function may fail.
• Install the motor on the regulator and connect it to the one-touch window switch.
• Pull up the switch and confirm the window goes fully to the top.
• If the window drops after reaching the top, perform the reset steps below.

ANTI-PINCH RESET PROCEDURE

• Step 1: Pull the window switch briefly so the window moves slightly up to the top.
• Step 2: Hold the one-touch switch up for 3–5 seconds at the top position.
• Step 3: Press the window switch briefly so the window moves slightly down to the bottom.
• Step 4: Hold the one-touch switch down for 3–5 seconds at the bottom position.
• Step 5: Pull the one-touch switch to raise the window to the top and check that it no longer drops.

If the window still drops after reaching the top, repeat the reset steps until the anti-pinch function is correctly set.

IMPORTANT NOTES

• This part is intended as a repair replacement for the original regulator.
• Colour and finish may appear slightly different due to screen and lighting variations.
• Always compare the product photos and OE reference with your original part before ordering.
• Professional installation by a qualified automotive mechanic is recommended to maintain warranty coverage.