Front Right Electric Window Regulator w/ Motor for Toyota Camry Aurion V50

PRODUCT OVERVIEW

This front right electric window regulator with 10-pin motor is a high-quality aftermarket replacement, designed to restore smooth and reliable window operation on compatible Toyota Aurion and Camry V50 models.

KEY FEATURES

• Complete assembly with pre-fitted 10-pin electric motor
• Direct-fit replacement for the front right (driver side) door
• Designed for vehicles with one-touch / anti-pinch function
• High quality aftermarket construction for durability and reliable performance
• Supplied brand new with manufacturer warranty

SPECIFICATIONS

• Product: Window regulator with motor
• Operating mode: Electric
• Placement on vehicle: Front right (front driver side)
• Motor connector: 10 pins
• Part type: High quality aftermarket
• Condition: Brand new
• MPN / Item No.: 102174M10I
• Manufacturer warranty: 1 year (part only)
• Quantity supplied: 1 piece

VEHICLE FITMENT

• Toyota Aurion GSV50R 04/2012 – 12/2017
• Toyota Camry ASV50R 12/2011 – 10/2017
• Toyota Camry AVV50R 03/2012 – 10/2017

Fitment information is provided as a guide only. Always compare the part number, plug type (10-pin motor), mounting points, and images with your original regulator before purchasing.

ANTI-PINCH FUNCTION & SETUP

This regulator motor is compatible with anti-pinch / one-touch functionality. Incorrect testing before installation can cause the anti-pinch function to fail and require resetting.

• Do not power-test the motor before it is installed in the door.
• The motors are factory-tested and set before dispatch.
• After installation, connect the one-touch window switch and operate the window fully up to confirm correct function.

RESET PROCEDURE (ANTI-PINCH)

If the window drops slightly after reaching the top, reset the anti-pinch function as follows:

• Step 1: Pull the window switch briefly to move the window fully to the top position.
• Step 2: Hold the one-touch switch in the UP position for 3–5 seconds at the top.
• Step 3: Press the window switch briefly to move the window fully to the bottom position.
• Step 4: Hold the one-touch switch in the DOWN position for 3–5 seconds at the bottom.
• Step 5: Pull the one-touch switch to raise the window to the top again and check that it no longer drops.

If the window still drops after reaching the top, repeat the reset procedure until the anti-pinch function is correctly calibrated.

INSTALLATION & NOTES

• Professional installation by a qualified automotive mechanic is strongly recommended.
• Compare the mounting brackets, cable layout, and motor plug to your original part.
• Product images are for reference; actual colour/finish may vary slightly due to lighting and screens.
• This unit is supplied for repair/replacement purposes and is not an OEM-manufacturer branded part.