Front Right Electric Window Regulator w/ Motor 12V for Fuso Canter

PRODUCT OVERVIEW

This high quality aftermarket electric window regulator is designed for the front right (driver side) door of selected Mitsubishi/Fuso Canter models. Supplied complete with a 12V, 2‑pin motor, it is suitable as a direct replacement for repair of the original assembly.

KEY FEATURES

• Product type: Window regulator with motor
• Operating mode: Electric, 12V
• Placement: Front right (front driver side)
• Motor connection: 2 pins
• Construction: High quality aftermarket replacement
• Condition: Brand new unit
• MPN / Item No.: 102144G-12V
• Supply quantity: 1 piece
• Warranty: 1 year (part only)

VEHICLE FITMENT

Please use the list below as a guide and always compare the part and plug configuration with your original unit before purchase.

• Mitsubishi/Fuso Canter FE637 04/1995–10/2002 (as listed)
• Mitsubishi/Fuso Canter FE657 09/1996–09/1997
• Mitsubishi/Fuso Canter FE649 04/1995–08/2005
• Mitsubishi/Fuso Canter FE537 04/1995–09/2002
• Mitsubishi/Fuso Canter FG637 07/1996–10/2002 (incl. 5.5T)
• Mitsubishi/Fuso Canter FE639 06/1995–06/1996
• Mitsubishi/Fuso Canter FE647 07/1996–10/2002
• Mitsubishi/Fuso Canter FE539 04/1995–06/1996
• Mitsubishi/Fuso Canter FG639 08/1995–06/1996
• Mitsubishi/Fuso Canter FE659 07/1995–08/2005
• Mitsubishi/Fuso Canter FB511 03/1998–09/2002
• Mitsubishi/Fuso Canter FG649 6.0T 10/2002–11/2007

Fitment years and variants are indicative only. Check your existing regulator and part number where possible.

ANTI-PINCH FUNCTION SETUP (WHERE APPLICABLE)

For window regulators or motors equipped with anti-pinch and one-touch function, correct initialization is critical. Do not operate the motor out of the door assembly before setup, as this may cause the anti-pinch function to fail and require resetting.

• Install the motor and regulator in the door and connect to the one-touch window switch.
• Operate the switch to raise the window. If it travels fully to the top and stays there, the setup is correct.
• If the window drops after reaching the top position, perform the reset procedure below.

Reset procedure (typical)

• Step 1: Pull the window switch briefly so the glass moves slightly up to the top.
• Step 2: Hold the one-touch switch up for 3–5 seconds at the top position.
• Step 3: Press the switch briefly so the glass moves slightly down to the bottom.
• Step 4: Hold the one-touch switch down for 3–5 seconds at the bottom position.
• Step 5: Pull the one-touch switch to fully raise the window and verify it remains at the top.

If the window still drops after reaching the top, repeat the procedure until the anti-pinch function is correctly set.

INSTALLATION & WARRANTY NOTES

• For reliable operation and to maintain warranty, installation by a qualified automotive technician is recommended.
• This part is supplied for repair and replacement purposes and is not manufactured by the vehicle maker.
• Images are provided as a guide; minor visual differences can occur due to lighting and screen settings.
• Compare mounting points, plug type and overall layout with your original regulator before fitting.
• Warranty covers the part only and does not include labour or associated costs.