Front Right Electric Window Regulator w/ Motor for Chrysler Grand Voyager RT

PRODUCT OVERVIEW

This front right electric window regulator with 6-pin motor is a high quality aftermarket replacement, designed to restore smooth and reliable window operation on compatible Chrysler Grand Voyager RT models.

KEY FEATURES

• Complete assembly with pre-fitted electric motor
• 6-pin motor connection for correct electrical interface
• Direct-fit replacement for the specified OE reference
• Engineered for consistent lifting and lowering performance
• Supplied brand new with manufacturer warranty

SPECIFICATIONS

• Product: Window regulator
• Operating mode: Electric
• Placement on vehicle: Front right (front driver side)
• Motor connection: 6 pins
• OE reference number: 68030654AA
• MPN / Item No.: 102087M6D
• Part type: High quality aftermarket
• Condition: Brand new
• Quantity supplied: 1 piece
• Manufacturer warranty: 1 year (part only)

FITMENT

• Chrysler Grand Voyager RT 04/2008 - 05/2016

Always compare the reference number and plug type with your original part before purchase to ensure compatibility.

ANTI-PINCH FUNCTION SETUP

This regulator motor is equipped with an anti-pinch safety function. Incorrect testing before installation may cause the function to fail and require resetting.

• Do not power-test the motor before it is installed in the door.
• The motors are pre-tested and pre-set before dispatch.
• Install the motor, connect to the one-touch window switch and raise the window fully to confirm correct operation.
• If the window drops after reaching the top, perform the reset procedure below.

Reset procedure:

• Step 1: Pull the window switch briefly to move the window slightly up to the top position.
• Step 2: Hold the one-touch switch up for 3–5 seconds at the top.
• Step 3: Press the window switch briefly to move the window slightly down to the bottom.
• Step 4: Hold the one-touch switch down for 3–5 seconds at the bottom.
• Step 5: Use the one-touch switch to raise the window fully to the top again.

The reset is complete if the window no longer drops after reaching the top. If it still drops, repeat the above steps until successful.

INSTALLATION & WARRANTY NOTES

• Intended for repair and replacement of existing components.
• Professional installation by a qualified automotive technician is recommended to maintain warranty.
• Warranty covers the part only and excludes labour or associated costs.
• Do not remove any tamper-evident seals or labels on the motor before confirming correct fitment, as this may affect return eligibility.
• Product colour/finish may vary slightly from images due to lighting and display settings.

Inspect the item on arrival and compare with your original regulator and connector style before installation. Use strictly as intended and follow all installation and reset instructions to ensure proper operation and service life.