Front Right Window Regulator with Motor 2-Pin for Subaru Tribeca B9 2006-2014

PRODUCT OVERVIEW

This electric window regulator is designed for reliable operation and direct replacement of the original unit on selected Subaru Tribeca B9 models.

KEY FEATURES

• Complete electric window regulator assembly with motor
• Front right (front driver side) door position
• 2-pin motor connection
• High quality aftermarket construction
• Brand new part, supplied as 1 piece
• Manufacturer warranty: 1 year (part only)
• MPN / Item No.: 100107

FITMENT

• Subaru Tribeca B9 10/2006 - 2014

Note: Always visually match the part and connector type to your original regulator before purchase.

SPECIFICATIONS

• Product: Window Regulator
• Operating mode: Electric
• Placement on vehicle: Front right (front driver side)
• Motor: 2 pins
• Part specs: High quality aftermarket
• Condition: Brand new
• MPN / Item No.: 100107
• Quantity supplied: 1 piece
• Manufacturer warranty: 1 year (part only)

ANTI-PINCH FUNCTION SET-UP (IF APPLICABLE)

If your vehicle uses an anti-pinch function, the motor must be set correctly after installation. Do not bench test the motor before fitting it to the door, as this may require a reset.

ANTI-PINCH RESET PROCEDURE

• Step 1: Pull the window switch briefly to move the glass fully up to the top.
• Step 2: Hold the one-touch switch in the up position for 3–5 seconds at the top.
• Step 3: Press the window switch briefly to move the glass fully down to the bottom.
• Step 4: Hold the one-touch switch in the down position for 3–5 seconds at the bottom.
• Step 5: Pull the one-touch switch to move the window up to the top and confirm it no longer drops after reaching the top.

If the window still drops after reaching the top, repeat the above steps until the anti-pinch function is correctly set.

INSTALLATION & IMPORTANT NOTES

• Professional installation by a qualified automotive mechanic is recommended.
• Compare all mounting points, rail design and plug type with the original part.
• Colour or finish may appear slightly different due to screen and lighting variations.
• For regulators with tamper-evident seals on plugs or motor housings, do not remove the seals unless instructed, as this may affect return eligibility.