Front Right Electric Window Regulator & Motor for Ford Focus LR 98-05

PRODUCT OVERVIEW

This front right electric window regulator is supplied complete with a 2-pin motor and is designed as a high quality aftermarket replacement for selected Ford Focus LR models from 1998 to 2005.

KEY FEATURES

• Complete assembly with pre-fitted electric motor (2-pin connection)
• Front right position (driver side)
• Direct-fit replacement for damaged or worn regulators
• High quality aftermarket construction
• Supplied brand new

SPECIFICATIONS

• Product: Window regulator with motor
• Operating mode: Electric
• Placement on vehicle: Front right (front driver side)
• Motor connection: 2 pins
• OE reference numbers: XS41A23200BY, 1149694, 1331612
• Part type: High quality aftermarket
• Condition: Brand new
• MPN / Item No.: 101872D
• Quantity supplied: 1 piece
• Warranty: 1 year (part only)

VEHICLE COMPATIBILITY

• Ford Focus LR 10/1998 – 04/2005, 5-door hatch
• Ford Focus LR 2000 – 04/2005, 4-door sedan

Use the OE reference numbers and product images to verify compatibility with your original part before purchase.

ANTI-PINCH FUNCTION SETUP (IF APPLICABLE)

• Do not test the motor before it is installed in the door, or the anti-pinch function may need resetting.
• The motors are tested and set correctly before dispatch.
• Install the regulator and connect it to the one-touch window switch. Pull the switch up to confirm the window runs smoothly to the top.
• If the window goes up and then drops slightly after reaching the top, reset the anti-pinch function.

Reset procedure:

• Step 1: Pull the window switch briefly so the window moves slightly up to the top stop.
• Step 2: Hold the one-touch switch up for 3–5 seconds at the top.
• Step 3: Press the window switch briefly so the window moves slightly down to the bottom stop.
• Step 4: Hold the one-touch switch down for 3–5 seconds at the bottom.
• Step 5: Pull the one-touch switch to raise the window fully and confirm it no longer drops at the top.

If the window still drops after reaching the top, repeat the reset steps until the function is correctly set.

INSTALLATION & NOTES

• Professional installation by a qualified automotive mechanic is strongly recommended.
• Compare the product images and OE numbers with your original regulator before ordering.
• Colour and finish may vary slightly due to screen settings and lighting, but functionality is not affected.