Front Right Power Window Regulator w/ Motor 5-Pin for Toyota RAV4 2000-2006

PRODUCT OVERVIEW

This front right electric window regulator with 5-pin motor is a high-quality aftermarket replacement designed for selected Toyota RAV4 ACA21R and ACA23R 4-door SUV models. Supplied as a complete assembly, it is suitable for repair and replacement of the original unit.

KEY FEATURES

• Complete electric window regulator with motor
• Front right (driver side) door position
• 5-pin motor connector
• High-quality aftermarket construction
• Direct replacement for damaged or worn regulator
• Supplied as 1 piece

SPECIFICATIONS

• Product: Window regulator
• Operating mode: Electric
• Placement on vehicle: Front right (front driver side)
• Motor: 5 pins
• Part specs: High quality aftermarket
• Condition: Brand new
• MPN / Item No.: 100122A
• Warranty: 1 year (part only)
• Quantity supplied: 1 piece

VEHICLE FITMENT

• Toyota RAV4 ACA21R 07/2000–03/2003 1AZ-FE 2.0L 4-door SUV compact
• Toyota RAV4 ACA23R 10/2003–01/2006 2AZ-FE 2.4L 4-door SUV compact

Fitment information is provided as a guide only. Always compare the part number, connector type, and product images with your original component before purchase.

ANTI-PINCH FUNCTION SETUP

This regulator motor may be equipped with an anti-pinch (one-touch) safety function. Do not test the motor before it is installed in the door, or the anti-pinch function may require resetting.

RESET PROCEDURE (SUMMARY)

• Install the regulator and connect it to the one-touch window switch.
• Operate the window to the top and bottom limits following the switch instructions.
• If the window drops after reaching the top, repeat the reset cycle until it remains in the fully closed position.

For safety and correct operation, this component should be installed and tested by a qualified automotive technician.

IMPORTANT NOTES

• Images are for reference and may vary slightly due to lighting or screen settings.
• Use this part for repair and replacement applications only.
• Check connector type (5-pin), mounting points, and orientation against your original part.