Front Right Electric Window Regulator 6-Pin Motor for Subaru Forester SJ

PRODUCT OVERVIEW

This electric window regulator is a high-quality aftermarket replacement for the front right (driver side) door on Subaru Forester SJ models. It is supplied as a complete assembly with a pre-fitted 6-pin motor, providing reliable power window operation and smooth, consistent performance.

KEY FEATURES

• Complete window regulator assembly with pre-installed electric motor
• 6-pin motor connector for correct electrical interface
• Designed for front right (driver side) door position
• Direct replacement for damaged or faulty original regulator
• High-quality aftermarket construction for durability
• Brand new part, supplied as 1 piece

FITMENT

• Subaru Forester SJ 01/2013 - 09/2018
• Placement: Front right (front driver side)

Before purchase, visually compare this regulator and connector configuration with your original part to ensure compatibility.

SPECIFICATIONS

• Product type: Window regulator
• Operating mode: Electric
• Motor connector: 6-pin
• Condition: Brand new
• Part specs: High-quality aftermarket
• MPN / Item No.: 101740M6I
• Quantity supplied: 1 piece
• Warranty: 1 year (part only)

ANTI-PINCH FUNCTION SETUP

This regulator motor is equipped with an anti-pinch safety function. To ensure correct operation, follow the setup procedure after installation.

• Do not test the motor before it is installed in the door, or the anti-pinch function may require resetting.
• Install the regulator and connect it to the one-touch window switch.
• Operate the switch to raise the window fully. If the window drops after reaching the top, perform the reset steps below.

ANTI-PINCH RESET PROCEDURE

• Step 1: Pull the window switch briefly to move the window slightly up to the top position.
• Step 2: Hold the one-touch switch up for 3–5 seconds at the top.
• Step 3: Press the window switch briefly to move the window slightly down to the bottom position.
• Step 4: Hold the one-touch switch down for 3–5 seconds at the bottom.
• Step 5: Pull the one-touch switch to raise the window fully to the top and confirm it no longer drops.

If the window still drops after reaching the top, repeat the reset steps until the anti-pinch function is correctly set.

INSTALLATION & WARRANTY NOTES

• Professional installation by a qualified automotive technician is recommended to maintain warranty coverage.
• Warranty covers the part only and does not include labour or additional services.
• The product must not be modified, opened, or tampered with, and must be installed and used according to the supplied instructions.
• Colour or finish may vary slightly from display images due to screen and lighting differences.

Always verify compatibility using your vehicle details and by comparing the photos and connector style with your original regulator before ordering.