Front Right Power Window Regulator with Motor for Mitsubishi 380 05-08

PRODUCT OVERVIEW

This front right power window regulator with integrated motor is designed as a direct replacement for selected Mitsubishi 380 models. It restores smooth and reliable window operation using an electric 2-pin motor assembly.

KEY FEATURES

• Complete assembly: window regulator with pre-fitted electric motor
• Electric 2-pin motor for consistent power window operation
• Front right position (driver side on right-hand-drive vehicles)
• High quality aftermarket construction
• Brand new part supplied as a single piece
• Backed by a 1-year parts-only warranty

SPECIFICATIONS

• Product type: Window regulator with motor
• Operating mode: Electric
• Placement on vehicle: Front right (front driver side)
• Motor connector: 2 pins
• Part specs: High quality aftermarket
• Condition: Brand new
• MPN / Item No.: 100652D
• Warranty: 1 year (part only)
• Quantity supplied: 1 piece

VEHICLE FITMENT

• Mitsubishi 380 DB 09/2005 - 12/2008

Fitment information is provided as a guide only. Always compare the part number, connector type and mounting points with your original regulator before purchase.

ANTI-PINCH FUNCTION RESET (IF APPLICABLE)

For regulators with motors incorporating an anti-pinch (one-touch) safety function, correct setup is essential for proper operation.

• Do not power or test the motor before it is fully installed in the door.
• Install the motor and connect it to the one-touch window switch.
• Pull the switch up; the window should travel fully to the top.
• If the window drops after reaching the top, perform a reset as below.

Reset procedure:

• Step 1: Pull the window switch briefly to move the glass slightly up to the top position.
• Step 2: Hold the one-touch switch up for 3–5 seconds at the top.
• Step 3: Press the switch briefly to move the window slightly down to the bottom.
• Step 4: Hold the one-touch switch down for 3–5 seconds at the bottom.
• Step 5: Pull the one-touch switch to move the window back up to the top and confirm it no longer drops.

If the glass still drops after reaching the top, repeat the reset procedure until the anti-pinch function is correctly set.

INSTALLATION & WARRANTY NOTES

• Intended for use as a replacement repair part.
• Professional installation by a qualified automotive technician is recommended to maintain warranty coverage.
• Warranty covers the part only and does not include labour or ancillary costs.
• Compare product photos, connector style and mounting points with your original regulator before installation.

Product images are for reference and colours or finishes may vary slightly due to lighting and screen settings.