Front Right Power Window Regulator & 2-Pin Motor for Ford Falcon FG/FGX

PRODUCT OVERVIEW

This front right electric window regulator with pre-fitted 2-pin motor is a high-quality aftermarket replacement designed for selected Ford Falcon FG and FGX models. It is supplied brand new and backed by a 1-year parts warranty.

KEY FEATURES

• Complete assembly with electric motor pre-installed
• Front right (driver side) fitment
• 2-pin motor connection
• Direct-replacement design for straightforward installation
• High quality aftermarket construction
• Brand new unit, not reconditioned

SPECIFICATIONS

• Product: Window regulator with motor
• Operating mode: Electric
• Placement on vehicle: Front right (front driver side)
• Motor connector: 2 pins
• OE reference number: BGF23200A
• Part type: High quality aftermarket
• Condition: Brand new
• MPN / Item No.: 101625
• Warranty: 1 year (part only)
• Quantity supplied: 1 piece

FITMENT

• Ford Falcon FG: 02/2008 – 09/2014
• Ford Falcon FGX: 10/2014 – 2016

Use the OE reference number and product images to confirm compatibility with your existing part before purchasing.

ANTI-PINCH FUNCTION SETUP (IF APPLICABLE)

This regulator motor may include an anti-pinch safety function. Correct setup is essential for proper operation.

• Do not test the motor before it is installed in the door, or the anti-pinch function may require resetting.
• The motors are factory-tested and set before dispatch.
• After installation, connect to the one-touch window switch and operate the window fully up to verify correct function.
• If the window drops down after reaching the top, perform the reset procedure below.

ANTI-PINCH RESET PROCEDURE

• Step 1: Pull the window switch briefly to move the glass slightly up to the top position.
• Step 2: Hold the one-touch switch in the up position for 3–5 seconds at the top.
• Step 3: Press the window switch briefly to move the glass slightly down to the bottom.
• Step 4: Hold the one-touch switch in the down position for 3–5 seconds at the bottom.
• Step 5: Pull the one-touch switch to move the window fully up to the top.

The reset is complete if the window remains at the top without dropping. If it still drops, repeat the reset steps until successful.

INSTALLATION & WARRANTY NOTES

• This part is intended for repair and replacement of existing components.
• All parts should be installed by a qualified automotive mechanic to maintain warranty coverage.
• Window regulators and motors may be supplied with tamper-evident seals; removing or damaging these can affect return eligibility.
• Colour or finish may vary slightly from images due to screen settings and lighting.
• Always compare the product photos and OE reference number with your original part before installation.