Front Right Power Window Regulator w/ Motor 2-Pin for Hyundai iLoad iMax

PRODUCT OVERVIEW

This front right electric window regulator with integrated 2-pin motor is a high quality aftermarket replacement, supplied as a complete assembly ready for installation.

KEY FEATURES

• Complete window regulator with motor assembly
• Electric operation for smooth window movement
• Designed for front right (driver side) door
• 2-pin motor connection
• High quality aftermarket construction
• Brand new part, supplied as a single piece

SPECIFICATIONS

• Product: Window regulator with motor
• Operating mode: Electric
• Placement on vehicle: Front right (front driver side)
• Motor: 2-pin connector
• Part type: High quality aftermarket
• Condition: Brand new
• MPN/Item No.: 100678M2A
• Quantity supplied: 1 piece
• Manufacturer warranty: 1 year (part only)

FITMENT

• Hyundai iLoad / iMax TQ 11/2007 – 09/2021

Use this information as a guide only. Always compare the part number and photos with your original component before purchase.

ANTI-PINCH FUNCTION SETUP (IF APPLICABLE)

For regulators with motors that include an anti-pinch function, the motor must be set correctly after installation. Do not power-test the motor before it is installed in the door, or the anti-pinch function may require resetting.

RESET PROCEDURE

• Step 1: Pull the window switch briefly to move the glass slightly up to the top position.
• Step 2: Hold the one-touch switch up for 3–5 seconds at the top position.
• Step 3: Press the window switch briefly to move the glass slightly down to the bottom position.
• Step 4: Hold the one-touch switch down for 3–5 seconds at the bottom position.
• Step 5: Pull the one-touch switch to raise the window fully to the top and confirm it does not drop back down.

If the window drops after reaching the top, repeat the reset steps until the function is correctly set.

INSTALLATION & WARRANTY NOTES

• Professional installation by a qualified automotive mechanic is strongly recommended.
• The part is intended for repair and replacement use only.
• Product images are for reference; colour or finish may vary slightly due to screen settings and lighting.
• Always match the product photos and connector type to your original part before ordering.

Warranty covers the replacement of the defective part only and does not include labour, incorrect installation, misuse, or damage caused by improper handling.