Front Right Electric Window Regulator with Motor for Toyota Corolla AE112

PRODUCT OVERVIEW

This front right electric window regulator with motor is a high-quality aftermarket replacement designed for Toyota Corolla AE112 models. Supplied as a complete assembly with a 2-pin motor, it is suitable for repair and replacement of the original unit.

KEY FEATURES

• Complete window regulator assembly with electric motor
• Designed for front right (driver side) door
• 2-pin motor connection
• High quality aftermarket construction
• Brand new unit supplied as a single piece
• Covered by a 12-month manufacturer warranty (part only)

SPECIFICATIONS

• Product: Window regulator
• Operating mode: Electric
• Placement on vehicle: Front right (front driver side)
• Motor: 2 pins
• Part specs: High quality aftermarket
• Condition: Brand new
• MPN/Item No.: 101171D
• Manufacturer warranty: 1 year (part only)
• Quantity supplied: 1 piece

FITMENT

• Toyota Corolla AE112 1997–2002

Please visually match this regulator and motor to your original part and confirm the pin configuration before purchasing.

ANTI-PINCH FUNCTION NOTICE

Do not test the motor before it is installed in the door, as this may cause the anti-pinch function to fail. Motors are pre-tested and set correctly prior to supply. After installation, connect to the one-touch window switch and check that the window moves fully to the top. If the glass drops after reaching the top, reset the anti-pinch function.

ANTI-PINCH RESET PROCEDURE

• Step 1: Pull the window switch briefly so the window moves slightly up to the top.
• Step 2: Hold the one-touch switch up for 3–5 seconds at the top position.
• Step 3: Press the window switch briefly so the window moves slightly down to the bottom.
• Step 4: Hold the one-touch switch down for 3–5 seconds at the bottom position.
• Step 5: Pull the one-touch switch so the window travels fully up to the top.

The reset is complete if the window remains at the top. If it drops again, repeat the above steps until successful.

INSTALLATION & NOTES

• Intended for repair and replacement of existing components only.
• Professional installation by a qualified automotive mechanic is strongly recommended.
• Colour and finish may vary slightly from images due to screen and lighting differences.
• Images are of the actual product supplied; use them to confirm compatibility.
• Do not remove any tamper-evident seals or labels on the motor or plug, as this may affect return eligibility.