Front Right Electric Window Regulator with Motor 6-Pin for Honda Accord CR

PRODUCT OVERVIEW

This front right electric window regulator with integrated 6-pin motor is a high quality aftermarket replacement, designed for selected Honda Accord CR sedan models. Supplied brand new as a complete assembly for efficient repair.

KEY FEATURES

• Complete electric window regulator with motor assembly
• Front right position (front driver side)
• 6-pin motor connector
• High quality aftermarket construction
• Supplied brand new, 1-piece unit
• 12-month manufacturer warranty (part only)
• MPN / Item No.: 101342

VEHICLE FITMENT

Suitable for the following Honda Accord CR sedan applications:

• Honda Accord CR 05/2013 - 01/2019 K24W3 2.4L Sedan
• Honda Accord CR 05/2015 - 02/2020 LFA1 2.0L Sedan
• Honda Accord CR 05/2013 - 01/2019 J35Y3 3.5L Sedan

Important: Always compare the connector type, mounting points and overall design with your original regulator before purchase.

SPECIFICATIONS

• Product: Window regulator
• Operating mode: Electric
• Placement on vehicle: Front right (front driver side)
• Motor: 6-pin
• Part specs: High quality aftermarket
• Condition: Brand new
• MPN / Item No.: 101342
• Warranty: 1 year (part only)
• Quantity supplied: 1 piece

ANTI-PINCH FUNCTION SETUP

This regulator motor supports an anti-pinch safety function. Incorrect testing before installation can cause the function to fail and require resetting.

Installation notes:

• Do not test the motor before it is installed in the door.
• The motors are pre-tested and set before dispatch.
• Install the regulator, connect to the one-touch window switch and raise the window fully to verify operation.
• If the window drops after reaching the top, perform the reset procedure below.

Anti-pinch reset procedure:

• Step 1: Pull the window switch briefly to move the glass slightly up to the top position.
• Step 2: Hold the one-touch switch up for 3–5 seconds at the top.
• Step 3: Press the window switch briefly to move the glass slightly down to the bottom position.
• Step 4: Hold the one-touch switch down for 3–5 seconds at the bottom.
• Step 5: Pull the one-touch switch to move the window fully up and check that it no longer drops.

If the window still drops after reaching the top, repeat the steps above until the reset is successful.

INSTALLATION & WARRANTY NOTES

• Intended for use as a replacement repair part.
• Professional installation by a qualified automotive mechanic is recommended to maintain warranty.
• Warranty covers the replacement of the defective part only and excludes labour or consequential damage.
• Colour and finish may vary slightly from images due to screen settings and lighting.
• Always match the product photos and specifications to your original part before purchasing.