Front Right Electric Window Regulator with Motor 6 Pin for Honda CR‑V RE 2007-2012

PRODUCT OVERVIEW

This front right electric window regulator with 6-pin motor is a high-quality aftermarket replacement, designed for reliable power window operation on compatible Honda CR-V RE models from 02/2007 to 10/2012.

KEY FEATURES

• Complete assembly with pre-fitted electric motor
• 6-pin motor connection for correct integration with vehicle electronics
• Direct-fit design for the front right (driver side) door
• Engineered as a high quality aftermarket replacement
• Supplied brand new, ready for installation

SPECIFICATIONS

• Product: Window regulator with motor
• Operating mode: Electric
• Placement on vehicle: Front right (front driver side)
• Motor connector: 6 pins
• Part type: High quality aftermarket
• Condition: Brand new
• MPN / Item No.: 101361
• Warranty: 1 year (part only)
• Quantity supplied: 1 piece

FITMENT

• Honda CR-V RE 02/2007 - 10/2012

Always compare the product images and specifications with your original part to confirm compatibility before purchase.

ANTI-PINCH FUNCTION SETUP

This window motor may be equipped with an anti-pinch (one-touch) safety function. Do not power-test the motor before installation in the door, as this can disrupt the factory setting.

• Install the regulator and motor assembly in the door.
• Connect the one-touch window switch and operate the window fully up.
• If the window drops after reaching the top, reset the anti-pinch function as outlined below.

ANTI-PINCH RESET PROCEDURE

• Step 1: Pull the window switch briefly to move the glass slightly up to the top position.
• Step 2: Hold the one-touch switch up for 3–5 seconds at the top.
• Step 3: Press the window switch briefly to move the glass slightly down to the bottom.
• Step 4: Hold the one-touch switch down for 3–5 seconds at the bottom.
• Step 5: Pull the one-touch switch to move the window fully up and check operation.

If the window still drops after reaching the top, repeat the reset steps until the function operates correctly.

INSTALLATION & WARRANTY NOTES

• Professional installation by a qualified automotive mechanic is strongly recommended.
• Warranty covers replacement of the defective part only and does not include labour or ancillary costs.
• Do not modify or tamper with the motor, regulator, or any seals, as this may affect eligibility for return or warranty assessment.
• Colour and finish may vary slightly from images due to lighting and screen differences.

This part is intended as a replacement component for repair and maintenance of compatible vehicles.