Front Right Window Regulator w/ Motor 6-Pin for Honda Odyssey RB 04-08

PRODUCT OVERVIEW

This high quality aftermarket electric window regulator is designed for reliable operation of the front right window on Honda Odyssey RB models. Supplied complete with a 6-pin motor for straightforward replacement.

KEY FEATURES

• Complete window regulator with integrated motor
• Electric operation with 6-pin connector
• Direct-fit replacement for front right (driver side)
• High quality aftermarket construction
• Brand new part with 1-year warranty (part only)

SPECIFICATIONS

• Product: Window regulator
• Operating mode: Electric
• Placement on vehicle: Front right (front driver side)
• Motor: 6 pins
• Part type: High quality aftermarket
• Condition: Brand new
• MPN/Item No.: 100073I
• Manufacturer warranty: 1 year (part only)
• Quantity supplied: 1 piece

FITMENT DETAILS

• Honda Odyssey RB 10/2003 - 09/2008 K24A 2.4L Wagon

Always compare the product images, connector type, and mounting points with your original regulator to confirm compatibility before purchase.

ANTI-PINCH FUNCTION SETUP

This regulator motor is equipped with an anti-pinch function. Do not operate or test the motor before it is installed in the door, or the function may require resetting.

• Install the motor and connect it to the one-touch window switch.
• Pull the switch up; the window should travel fully to the top.
• If the window drops after reaching the top, perform the reset procedure below.

ANTI-PINCH RESET PROCEDURE

• Step 1: Pull the window switch briefly to move the window slightly up to the top.
• Step 2: Hold the one-touch switch up for 3–5 seconds at the top position.
• Step 3: Press the window switch briefly to move the window slightly down to the bottom.
• Step 4: Hold the one-touch switch down for 3–5 seconds at the bottom position.
• Step 5: Pull the one-touch switch to raise the window fully to the top and check that it no longer drops.

If the window still drops after reaching the top, repeat the reset steps until the function operates correctly.

INSTALLATION & NOTES

• Professional installation by a qualified automotive mechanic is recommended.
• Part is intended as a replacement component for repair purposes.
• Colour or finish may vary slightly from images due to lighting and screen settings.
• Images are representative of the actual product supplied.