Front Right Electric Window Regulator & 6-Pin Motor for Corolla ZZE122R

PRODUCT OVERVIEW

This front right electric window regulator with integrated 6-pin motor is a high-quality aftermarket replacement for Toyota Corolla ZZE122R models produced from 12/2001 to 04/2007 (1ZZFE 1.8L, VIN: JTD, Japan built). Supplied brand new with a 1-year parts warranty.

KEY FEATURES

• Direct-fit front right (front driver side) window regulator assembly
• Integrated 6-pin electric motor for power window operation
• High-quality aftermarket construction for reliability and durability
• Supplied as one complete assembly, ready for installation
• Brand new part with 1-year parts warranty
• MPN/Item No.: 100119H

SPECIFICATIONS

• Product type: Window regulator assembly with motor
• Operating mode: Electric
• Placement on vehicle: Front right (front driver side)
• Motor connection: 6-pin plug
• Part type: Aftermarket replacement
• Condition: Brand new
• Quantity supplied: 1 piece

FITMENT DETAILS

• Toyota Corolla ZZE122R 12/2001–04/2007, 1ZZFE 1.8L, VIN: JTD (Japan built)

Please compare the product images, plug type, and mounting points with your original regulator and motor before purchase to confirm correct fitment.

ANTI-PINCH FUNCTION SETUP (IF APPLICABLE)

Some electric window motors include an anti-pinch safety function. Incorrect testing before installation can cause this function to fail and require resetting.

• Do not test the motor before it is installed in the door.
• Motors are pre-tested and set correctly before dispatch.
• Install the motor, connect it to the one-touch window switch, and raise the window. Correct operation is when the window goes fully up and stays at the top.
• If the window drops down after reaching the top, follow the reset procedure below.

ANTI-PINCH RESET PROCEDURE

• Step 1: Pull the window switch briefly to move the window slightly up to the top position.
• Step 2: Hold the one-touch switch up for 3–5 seconds at the top.
• Step 3: Press the window switch briefly to move the window slightly down to the bottom position.
• Step 4: Hold the one-touch switch down for 3–5 seconds at the bottom.
• Step 5: Pull the one-touch switch again to move the window fully up.

The reset is complete if the window remains at the top. If it still drops after reaching the top, repeat the above steps until successful.

INSTALLATION & WARRANTY NOTES

• For safety and to maintain warranty coverage, installation by a qualified automotive mechanic is recommended.
• Warranty covers replacement of the defective part only and does not include labour or consequential damage.
• Tamper-evident seals on window regulators and motors must not be removed; removal may affect return or warranty eligibility.

Product images are for reference only and may vary slightly in colour due to lighting and screen settings, but the supplied part will match the stated specifications and fitment details.