Front Right Power Window Regulator w/ 7-Pin Motor for Holden Cruze JG JH

PRODUCT OVERVIEW

Front right electric window regulator with integrated 7-pin motor, designed as a high-quality aftermarket replacement for selected Holden Cruze JG/JH models.

KEY FEATURES

• Complete assembly: regulator with pre-fitted electric motor
• 7-pin motor plug for compatible OE-style connection
• Front right (driver side) fitment
• High quality aftermarket construction
• Supplied brand new, ready for installation

SPECIFICATIONS

VEHICLE COMPATIBILITY

• Holden Cruze JG 06/2009 – 2011
• Holden Cruze JH 2011 – 2016

Always compare the connector, mounting points and overall design with your original part before purchase.

ANTI-PINCH FUNCTION RESET (IF APPLICABLE)

For window motors with anti-pinch and one-touch function, the motor may require resetting after installation.

• Install the regulator and motor in the door before testing.
• Connect to the one-touch window switch and raise the window fully.
• If the glass drops after reaching the top, perform the reset steps below.

Reset procedure:

• Step 1: Pull the switch briefly to move the window up slightly to the top.
• Step 2: Hold the switch up for 3–5 seconds at the top position.
• Step 3: Press the switch briefly to move the window slightly down to the bottom.
• Step 4: Hold the switch down for 3–5 seconds at the bottom position.
• Step 5: Use the one-touch function to raise the window to the top and confirm it no longer drops.

If the window still drops after reaching the top, repeat the reset procedure until the anti-pinch calibration is successful.

INSTALLATION & NOTES

• Intended for use as a replacement part only.
• Professional installation by a qualified automotive mechanic is recommended.
• Product images are for reference; colour or finish may vary slightly due to lighting and screen settings.
• Check plug type, pin count and mounting layout against your original unit.