PRODUCT OVERVIEW
This gimbal bearing puller and installer kit is designed for servicing gimbal bearings on popular marine sterndrive applications, including select Mercruiser, OMC, and Volvo units. It provides the tools needed to remove and install gimbal bearings accurately while helping protect surrounding components.
KEY FEATURES
- Specialized puller and installer tools for gimbal bearing service
- Helps ensure precise bearing alignment during installation
- Reduces risk of damage to transom assemblies and drive components
- Suitable for professional marine technicians and DIY users
- Reusable kit for ongoing maintenance and repair work
TYPICAL APPLICATIONS
Intended for use on compatible Mercruiser, OMC, and Volvo marine sterndrives that utilize a serviceable gimbal bearing. Specific model compatibility can vary; verify dimensions and application details before use.
INSTALLATION & USAGE NOTES
- Use appropriate marine service manual procedures during removal and installation
- Inspect gimbal housing, seals, and related components while servicing the bearing
- Apply suitable marine-grade lubricants where specified by the manufacturer
- Always wear proper safety equipment when using puller and installer tools
FITMENT DISCLAIMER
No detailed fitment list is provided for this kit. Before purchase, confirm compatibility with your specific marine drive by checking your service manual or consulting a qualified marine technician.
Vehicle Compatibility
|
Gimbal Bearing Puller Installer Kit for Mercruiser Alpha Bravo OMC Volvo MR
Gimbal Bearing Puller Installer Kit for Mercruiser Alpha Bravo OMC Volvo MR
Description:
Compatibility: This tool set is designed to work with Mercruiser Alpha 1, MR, Bravo,
OMC Cobra, and Volvo. It allows you to efficiently replace
gimbal bearings.
Features: This
toolset simplifies the process of removing and installing gimbal
bearings. You'll need to drill a hole in the alignment tool to secure
the gimbal bearing installer.
Gimbal Bearing Puller: This remover tool makes it easy to take out gimbal bearings from bell housings by simply turning the end with a wrench.
Gimbal Bearing Installer: Use this tool to properly fit a new bearing into place. Just position
the bearing on the installer and insert it into the engine. It also
helps align the engine coupler with the gimbal bearing and drive unit.
Engine Alignment Tool: This is used to check your alignment, saving both the coupler and
gimbal bearing. A hole must be drilled in the tool to attach the gimbal
bearing driver. An eyebolt is included to allow the alignment tool to be
hung when not in use.
Hinge Pin Tool: This
tool is used to remove and install hinge pins for Mercruiser drive
units. It can separate the housing from the gimbal ring on the hinge pin
bolt.
Construction Quality: Built from high-grade solid steel with a protective black oxide
coating, this set is resistant to rust and corrosion. The tools are
heat-treated for added toughness and long-lasting performance.
Fitment:
For Mercruiser Alpha
For Alpha 1
For MR
For Bravo
For OMC Cobra
For Volvo
Package: (As Photos)
1x Gimbal Bearing Puller
1x Bearing Installer
1x Engine Alignment Tool
1x Eye Bolt
1x Hinge Pin Tool
PaymentReturns
Westpac Bank Deposit or Transfer, VISA, Master Card or Paypal and so on.You can also pay in-store by Cash, Eftpos, VISA or Master Card.
Please keep the products with all accessories in the original package before the return. Any change of mind returned will be charged 15% restocking fee
|
|
Gimbal Bearing Puller Installer Kit for Mercruiser Alpha Bravo OMC Volvo MR
Gimbal Bearing Puller Installer Kit for Mercruiser Alpha Bravo OMC Volvo MR
Description:
Compatibility: This tool set is designed to work with Mercruiser Alpha 1, MR, Bravo,
OMC Cobra, and Volvo. It allows you to efficiently replace
gimbal bearings.
Features: This
toolset simplifies the process of removing and installing gimbal
bearings. You'll need to drill a hole in the alignment tool to secure
the gimbal bearing installer.
Gimbal Bearing Puller: This remover tool makes it easy to take out gimbal bearings from bell housings by simply turning the end with a wrench.
Gimbal Bearing Installer: Use this tool to properly fit a new bearing into place. Just position
the bearing on the installer and insert it into the engine. It also
helps align the engine coupler with the gimbal bearing and drive unit.
Engine Alignment Tool: This is used to check your alignment, saving both the coupler and
gimbal bearing. A hole must be drilled in the tool to attach the gimbal
bearing driver. An eyebolt is included to allow the alignment tool to be
hung when not in use.
Hinge Pin Tool: This
tool is used to remove and install hinge pins for Mercruiser drive
units. It can separate the housing from the gimbal ring on the hinge pin
bolt.
Construction Quality: Built from high-grade solid steel with a protective black oxide
coating, this set is resistant to rust and corrosion. The tools are
heat-treated for added toughness and long-lasting performance.
Fitment:
For Mercruiser Alpha
For Alpha 1
For MR
For Bravo
For OMC Cobra
For Volvo
Package: (As Photos)
1x Gimbal Bearing Puller
1x Bearing Installer
1x Engine Alignment Tool
1x Eye Bolt
1x Hinge Pin Tool
PaymentReturns
Westpac Bank Deposit or Transfer, VISA, Master Card or Paypal and so on.You can also pay in-store by Cash, Eftpos, VISA or Master Card.
Please keep the products with all accessories in the original package before the return. Any change of mind returned will be charged 15% restocking fee
|
