Rear Left Power Window Regulator with Motor for Mitsubishi 380 DB 2005-2008

PRODUCT OVERVIEW

This rear left power window regulator with motor is a high-quality aftermarket replacement designed for Mitsubishi 380 DB models. It is supplied as a complete assembly for efficient repair and reliable window operation.

KEY FEATURES

• Complete electric window regulator with motor
• Rear left (rear passenger side) fitment
• 2-pin motor connection
• High quality aftermarket construction
• Brand new unit, supplied ready to install
• Supplied as 1 piece

SPECIFICATIONS

• Product: Window regulator with motor
• Operating mode: Electric
• Placement on vehicle: Rear left (rear passenger side)
• Motor connector: 2 pins
• Condition: Brand new
• Part specs: High quality aftermarket
• MPN / Item No.: 100653
• Quantity supplied: 1 piece
• Warranty: 1 year (part only)

VEHICLE COMPATIBILITY

• Mitsubishi 380 DB 09/2005 - 12/2008

Always compare the part number and photos with your original window regulator to confirm compatibility before purchase.

ANTI-PINCH FUNCTION RESET (IF APPLICABLE)

For regulators with motors that include an anti-pinch / one-touch function, the motor may require resetting after installation.

• Install the motor in the door before testing to avoid losing the anti-pinch setting.
• Connect to the one-touch window switch and check that the window travels fully upwards.
• If the window drops down after reaching the top, perform the reset steps below.

Reset procedure:

• Step 1: Pull the window switch briefly to move the glass slightly up to the top position.
• Step 2: Hold the one-touch switch up for 3–5 seconds at the top.
• Step 3: Press the window switch briefly to move the glass slightly down to the bottom.
• Step 4: Hold the one-touch switch down for 3–5 seconds at the bottom.
• Step 5: Pull the one-touch switch to move the window fully up and confirm it no longer drops after reaching the top.

If the window still drops after reaching the top, repeat the reset steps until the function operates correctly.

INSTALLATION & NOTES

• Professional installation by a qualified automotive technician is recommended.
• Part is intended for repair and replacement of a faulty original regulator.
• Product images are for reference; minor cosmetic variations may occur.
• Check plug type, mounting points and rail layout against the original part.