Rear Left Electric Window Regulator with Motor 2-Pin for Honda CR-V RD

Product Overview

This rear left electric window regulator with motor is a high-quality aftermarket replacement designed for Honda CR-V RD models from 10/1997 to 12/2001. Supplied as a complete assembly with a 2-pin motor, it restores smooth and reliable window operation on the rear passenger side door.

Key Features

• Complete electric window regulator with integrated motor
• Designed for rear left (rear passenger side) door
• 2-pin motor electrical connection
• High-quality aftermarket construction
• Brand new unit, supplied as 1 piece
• Covered by a 1-year parts warranty

Specifications

• Product: Window regulator
• Operating mode: Electric
• Placement on vehicle: Rear left (rear passenger side)
• Motor connection: 2-pin
• Part type: High-quality aftermarket
• Condition: Brand new
• MPN / Item No.: 101354
• Warranty: 1 year (part only)
• Quantity supplied: 1 piece

Fitment

• Honda CR-V RD 10/1997 - 12/2001

Before purchase, visually compare this window regulator and connector type to your original part to ensure correct fitment.

Anti-Pinch Function Setup (If Applicable)

For regulators fitted with an anti-pinch motor, correct setup is critical for proper operation.

• Do not power-test the motor before it is installed in the door, or the anti-pinch function may require resetting.
• Motors are factory-tested and pre-set prior to dispatch.
• After installation, connect to the one-touch window switch and raise the window fully to check operation.
• If the window drops down after reaching the top, perform the reset procedure below.

Anti-Pinch Reset Procedure

• Step 1: Pull the window switch briefly to move the glass slightly up to the top position.
• Step 2: Hold the one-touch switch up for 3–5 seconds at the top.
• Step 3: Press the window switch briefly to move the glass slightly down to the bottom.
• Step 4: Hold the one-touch switch down for 3–5 seconds at the bottom.
• Step 5: Pull the one-touch switch to move the window fully up and confirm it remains at the top.

If the window still drops after reaching the top, repeat the reset steps until the function is correctly set.

Installation & Warranty Notes

• Part is intended for repair and replacement purposes.
• Professional installation by a qualified automotive mechanic is strongly recommended.
• Warranty covers replacement of the defective part only and excludes labour or consequential damage.
• Do not remove any tamper-evident seals or labels on the motor or plugs, as this may affect return eligibility.

Product images are for reference only; colour or finish may vary slightly due to lighting and screen settings. Always match the product to your original part before installation.