Rear Left Power Window Regulator With Motor 2-Pin for Toyota RAV4

PRODUCT OVERVIEW

This rear left (rear passenger side) electric window regulator with motor is a high-quality aftermarket replacement, designed to restore smooth and reliable window operation on compatible Toyota RAV4 models.

KEY FEATURES

• Complete assembly with pre-fitted electric motor
• 2-pin motor connection for direct plug-in
• Rear left (rear passenger side) position
• High-quality aftermarket construction
• Brand new part supplied as a single piece

SPECIFICATIONS

• Product: Window regulator with motor
• Operating mode: Electric
• Placement on vehicle: Rear left (rear passenger side)
• Motor connection: 2 pins
• Condition: Brand new
• Part type: High quality aftermarket
• MPN / Item No.: 101520
• Quantity supplied: 1 piece
• Warranty: 1 year (part only)

FITMENT DETAILS

Suitable for the following vehicles (verify against your existing part before purchase):

• Toyota RAV4 ACA21R 07/2000–03/2003 1AZ-FE 2.0L 4-door SUV (compact)
• Toyota RAV4 ACA23R 10/2003–01/2006 2AZ-FE 2.4L 4-door SUV (compact)

Images are for the actual product supplied; colour/finish may appear slightly different due to lighting and screen settings.

ANTI-PINCH FUNCTION SETUP (IF APPLICABLE)

If your vehicle uses an anti-pinch electric motor, the function may need to be initialised after installation.

• Install the regulator and motor in the door before operating.
• Connect to the one-touch window switch and check that the window travels fully up.
• If the window drops down after reaching the top, perform a reset.

Reset procedure:

• Step 1: Pull the window switch briefly to move the glass fully to the top.
• Step 2: Hold the one-touch switch up for 3–5 seconds at the top position.
• Step 3: Press the window switch briefly to move the glass fully to the bottom.
• Step 4: Hold the one-touch switch down for 3–5 seconds at the bottom position.
• Step 5: Pull the one-touch switch to raise the window to the top and confirm it no longer drops.

If the window still drops after reaching the top, repeat the reset steps until the anti-pinch function is correctly initialised.

INSTALLATION & NOTES

• Professional installation by a qualified automotive technician is strongly recommended.
• Compare the mounting points, plug type, and overall design with your original regulator before fitting.
• This part is intended as a replacement component for repair and maintenance purposes.