Rear Right Window Regulator with 2-Pin Motor for Mitsubishi Outlander ZJ/ZK/ZL 2012–2021

PRODUCT OVERVIEW

This rear right electric window regulator is a high quality aftermarket replacement designed for Mitsubishi Outlander ZJ, ZK and ZL models. It includes a 2-pin motor and is supplied as a complete assembly for straightforward installation.

KEY FEATURES

• Application-specific design for Mitsubishi Outlander ZJ/ZK/ZL
• Electric operation with integrated 2-pin motor
• Rear right (rear driver side) door position
• Brand new, high quality aftermarket component
• Supplied as 1 complete window regulator assembly

SPECIFICATIONS

VEHICLE COMPATIBILITY

• Mitsubishi Outlander ZJ 11/2012 - 01/2015
• Mitsubishi Outlander ZK 01/2015 - 07/2021
• Mitsubishi Outlander ZL 01/2015 - 07/2021

Use the part number and images to confirm compatibility with your vehicle before purchase.

ANTI-PINCH FUNCTION SETUP

If your vehicle uses an anti-pinch function, the motor must be set correctly after installation. Do not power the motor before it is installed in the door, or the anti-pinch function may require resetting.

• Install the regulator and connect it to the one-touch window switch.
• Operate the switch to raise the window fully and verify operation.
• If the window drops after reaching the top, perform the reset procedure.

Reset procedure:

• Step 1: Pull the window switch briefly so the window moves slightly up to the top.
• Step 2: Hold the one-touch switch up for 3–5 seconds at the top position.
• Step 3: Press the window switch briefly so the window moves slightly down to the bottom.
• Step 4: Hold the one-touch switch down for 3–5 seconds at the bottom position.
• Step 5: Pull the one-touch switch to move the window to the top and confirm it no longer drops.

Repeat the reset steps if the window still drops after reaching the top.

ADDITIONAL INFORMATION

• Intended for use as a replacement part.
• Images are for reference; slight colour variation may occur due to lighting and screen settings.
• Professional installation by a qualified automotive technician is recommended.
• Compare the supplied images and specifications with your original part before ordering.