Rear Right Electric Window Regulator with Motor for Mitsubishi 380

Product Overview

This rear right electric window regulator with motor is a high-quality aftermarket replacement designed to restore smooth and reliable window operation on compatible Mitsubishi 380 models.

Key Features

• Complete regulator assembly with pre-fitted electric motor
• 2-pin motor electrical connection
• Rear right (rear driver side) door position
• Durable, high-quality aftermarket construction
• Supplied as 1 piece, ready for installation
• Supported by a 1-year parts warranty

Specifications

• Product type: Window regulator with motor
• Operating mode: Electric
• Placement on vehicle: Rear right (rear driver side)
• Motor connector: 2 pins
• Condition: Brand new
• Part type: High quality aftermarket
• MPN / Item No.: 100654D
• Quantity supplied: 1 piece
• Manufacturer warranty: 1 year (part only)

Vehicle Fitment

• Mitsubishi 380 DB 09/2005 – 12/2008

Before purchasing, visually compare this regulator and motor to your original part and confirm the rear right door position and connector type.

Anti-Pinch Function Setup

If your vehicle uses an anti-pinch function with one-touch window operation, follow these guidelines after installation:

• Do not power-test the motor before it is fully installed in the door.
• Install the regulator and connect it to the one-touch window switch.
• Pull the switch up to raise the window. If it goes up fully and stays up, the setting is correct.
• If the window drops after reaching the top, perform a reset as described below.

Anti-Pinch Reset Steps

• Step 1: Pull the window switch briefly to move the window slightly up to the top.
• Step 2: Hold the one-touch switch up for 3–5 seconds at the top position.
• Step 3: Press the window switch briefly to move the window slightly down to the bottom.
• Step 4: Hold the one-touch switch down for 3–5 seconds at the bottom position.
• Step 5: Pull the one-touch switch to raise the window fully to the top and check that it no longer drops.

If the window still drops after reaching the top, repeat the reset procedure until the function is correctly set.

Installation & Warranty Notes

• Intended for use as a replacement part for repair purposes.
• Professional installation by a qualified automotive mechanic is strongly recommended.
• Warranty covers replacement of the defective part only and excludes labour costs.
• Products that are modified, incorrectly installed, or damaged through misuse may not be eligible for warranty or return.

Product images are for reference only and may appear slightly different due to lighting and screen settings. Always match the connector, mounting points, and orientation to your original regulator before installation.