Rear Right Electric Window Regulator (No Motor) for Peugeot 207 SW

PRODUCT OVERVIEW

Rear right electric window regulator assembly (motor not included), designed as a high-quality aftermarket replacement for selected Peugeot 207 SW 4-door wagon models.

KEY FEATURES

• Direct-fit replacement window regulator
• Electric operating mode for smooth window movement
• Supplied without motor – reuse your existing motor where applicable
• High-quality aftermarket construction for reliable performance
• Supplied as a single piece for the specified door position

SPECIFICATIONS

• Product type: Window regulator
• Operating mode: Electric
• Placement on vehicle: Rear right (rear driver side)
• Motor: Not included
• OE reference number: 9224C9
• MPN/Item No.: 101433
• Part specification: High-quality aftermarket
• Condition: Brand new
• Quantity supplied: 1 piece
• Manufacturer warranty: 1 year (part only)

FITMENT

• Peugeot 207 4-door wagon (2006–2014)

This information is provided as a guide only. Always compare the part number and product images with your original component before purchase.

ANTI-PINCH FUNCTION RESET (FOR MOTORS WITH ANTI-PINCH)

If your electric window motor has an anti-pinch function and the window drops slightly after reaching the top position, the motor may require resetting after installation.

• Do not test the motor before it is installed in the door, or the anti-pinch function may fail and require reset.
• Install the motor on the regulator and connect it to the one-touch window switch.
• Operate the switch to raise the window fully. If the window drops after reaching the top, perform the reset steps below.

ANTI-PINCH RESET STEPS

• Step 1: Pull the window switch briefly to move the window slightly up to the top.
• Step 2: Hold the one-touch switch in the up position for 3–5 seconds at the top.
• Step 3: Press the window switch briefly to move the window slightly down to the bottom.
• Step 4: Hold the one-touch switch in the down position for 3–5 seconds at the bottom.
• Step 5: Pull the one-touch switch to raise the window fully to the top and check that it no longer drops.

If the window still drops after reaching the top, repeat the above procedure until the anti-pinch function is correctly set.

IMPORTANT NOTES

• This part is intended for repair and replacement purposes only.
• Images are for reference; colour or finish may vary slightly due to screen and lighting differences.
• Always match the product photos and OE reference number (9224C9) to your original part before ordering.
• Installation by a qualified automotive technician is strongly recommended to maintain warranty and ensure correct operation.