Rear Right Electric Window Regulator with Motor for Honda CR‑V RD 1997-2001

PRODUCT OVERVIEW

This rear right electric window regulator with 2-pin motor is a brand new, high-quality aftermarket replacement, designed for reliable repair of the rear driver-side power window on compatible Honda CR-V RD models.

KEY FEATURES

• Complete assembly supplied with pre-fitted electric motor
• 2-pin motor connection for direct plug-in compatibility
• Designed for rear right (rear driver-side) door installation
• Durable aftermarket construction for long service life
• Supplied as a single unit (1x window regulator with motor)

SPECIFICATIONS

• Product: Electric window regulator with motor
• Operating mode: Electric
• Placement on vehicle: Rear right (rear driver side)
• Motor connection: 2 pins
• Part type: Aftermarket replacement
• Condition: Brand new
• MPN / Item No.: 101355
• Warranty: 1 year (part only)
• Quantity supplied: 1 piece

VEHICLE COMPATIBILITY

• Honda CR-V RD 10/1997 – 12/2001

Before purchasing, visually compare this regulator and connector style with your original part to confirm compatibility.

ANTI-PINCH FUNCTION SETUP (IF APPLICABLE)

If your vehicle uses an anti-pinch function with one-touch window operation, the motor must be correctly initialised after installation.

• Do not power-test the motor before it is installed in the door.
• Install the regulator and connect it to the one-touch window switch.
• Operate the switch to raise the window fully and check if it stays at the top.
• If the window drops after reaching the top, perform the reset procedure below.

ANTI-PINCH RESET PROCEDURE

• Step 1: Pull the window switch briefly to move the glass slightly up to the top position.
• Step 2: Hold the one-touch switch in the up position for 3–5 seconds at the top.
• Step 3: Press the switch briefly to move the glass slightly down to the bottom position.
• Step 4: Hold the one-touch switch in the down position for 3–5 seconds at the bottom.
• Step 5: Pull the one-touch switch to raise the window fully to the top and check that it no longer drops.

If the window still drops after reaching the top, repeat the reset steps until the function operates correctly.

INSTALLATION & WARRANTY NOTES

• Intended for repair and replacement of an existing window regulator assembly.
• Professional installation by a qualified automotive technician is strongly recommended.
• Warranty covers replacement of the defective part only and does not include labour or consequential costs.
• Product colour or finish may appear slightly different due to screen and lighting variations.

Ensure all seals, labels, and connectors remain intact until fitment is confirmed, as tampering may affect eligibility for return or replacement.