Rear Right Window Regulator with Motor 2-Pin for Isuzu D-Max 2006-2012

PRODUCT OVERVIEW

This electric window regulator is designed for the rear right (rear driver side) door and includes a 2-pin motor. It is a brand-new, high-quality aftermarket replacement suitable for selected Isuzu and Holden models.

KEY FEATURES

• Complete window regulator assembly with motor
• Electric operation with 2-pin motor connection
• Rear right (rear driver side) door position
• High-quality aftermarket construction
• Supplied as 1 piece

SPECIFICATIONS

• Product: Window regulator
• Operating mode: Electric
• Placement on vehicle: Rear right (rear driver side)
• Motor: 2-pin
• Condition: Brand new
• Part specs: High quality aftermarket
• MPN/Item No.: 101346
• Manufacturer warranty: 1 year (part only)
• Quantity supplied: 1 piece

VEHICLE FITMENT

• Isuzu D-Max 10/2006 - 05/2012
• Holden Rodeo RA 03/2003 - 06/2008
• Holden Colorado RC 07/2008 - 05/2012

Always match the part number, plug type, mounting points, and product images with your original regulator before purchase.

ANTI-PINCH FUNCTION RESET (IF APPLICABLE)

If your vehicle uses an anti-pinch one-touch window system, follow these steps after installation if the window drops down after reaching the top:

• Install the regulator and connect it to the one-touch window switch before operating.
• Do not operate or test the motor before it is installed in the door.

Reset procedure:

• Step 1: Pull the window switch briefly to move the glass slightly up to the top.
• Step 2: Hold the one-touch switch up for 3–5 seconds at the top position.
• Step 3: Press the window switch briefly to move the glass slightly down to the bottom.
• Step 4: Hold the one-touch switch down for 3–5 seconds at the bottom position.
• Step 5: Pull the one-touch switch to raise the window fully to the top and check it no longer drops.

If the window still drops after reaching the top, repeat the reset steps until the function is correctly set.

INSTALLATION & WARRANTY NOTES

• For best results and to maintain warranty, installation by a qualified automotive mechanic is recommended.
• Regulator and motor assemblies may be supplied with tamper-evident seals on plugs or housings; do not remove these unless instructed, as this may affect return eligibility.
• Colour tone may vary slightly from images due to screen and lighting differences; images represent the actual style of product supplied.

This part is intended as a replacement component for repair and maintenance purposes and is not manufactured by the original vehicle maker.