Rear Right Electric Window Regulator w/ Motor 2-Pin for Saab 9-3 YS3F 03-11

PRODUCT OVERVIEW

This high-quality aftermarket electric window regulator is designed for the rear right (rear driver side) door of Saab 9-3 YS3F models. Supplied complete with a 2-pin motor, it is an ideal replacement for a faulty or worn regulator assembly.

KEY FEATURES

• Complete electric window regulator assembly with motor
• Rear right (rear driver side) door fitment
• 2-pin motor connection
• High quality aftermarket construction
• Direct replacement for listed OE reference numbers
• Supplied brand new as a single piece

SPECIFICATIONS

• Product: Window regulator
• Operating mode: Electric
• Placement on vehicle: Rear right (rear driver side)
• Motor: 2-pin
• OE reference numbers: 12788914, 12793731, 12802323
• Part type: High quality aftermarket
• Condition: Brand new
• MPN/Item No.: 101730E
• Quantity supplied: 1 piece
• Warranty: 1 year (part only)

VEHICLE FITMENT

• Saab 9-3 YS3F 2002–2012 (VIN: YS3F)

Use the OE reference numbers and compare the images and connector type with your original unit to confirm compatibility before purchase.

ANTI-PINCH FUNCTION SETUP (IF APPLICABLE)

If the motor is equipped with an anti-pinch function, follow these guidelines during installation:

• Do not power or test the motor before it is installed in the door, or the anti-pinch function may require resetting.
• Install the motor and connect it to the one-touch window switch, then raise the window fully to check operation.
• If the window drops after reaching the top position, reset the anti-pinch function.

ANTI-PINCH RESET PROCEDURE

• Step 1: Pull the window switch briefly to move the window slightly up to the top.
• Step 2: Hold the one-touch switch up for 3–5 seconds at the top position.
• Step 3: Press the switch briefly to move the window slightly down to the bottom.
• Step 4: Hold the one-touch switch down for 3–5 seconds at the bottom position.
• Step 5: Use the one-touch function to raise the window fully and confirm it no longer drops after reaching the top.

If the window still drops after reaching the top, repeat the reset steps until the function operates correctly.

INSTALLATION & NOTES

• Professional installation by a qualified automotive technician is recommended.
• Intended as a replacement part for repair of existing systems.
• Product images are for the actual item supplied; colour may vary slightly due to screen settings and lighting.
• Always match mounting points, connector type, and OE references with your original regulator before fitting.