Rear Right Electric Window Regulator with Motor for Land Rover Freelander

PRODUCT OVERVIEW

This rear right electric window regulator with motor is designed as a high-quality aftermarket replacement for selected Land Rover Freelander L314 models. Supplied as a complete assembly, it restores smooth and reliable rear window operation.

KEY FEATURES

• Complete window regulator with pre-fitted electric motor
• Rear right (rear driver side) position
• 2-pin motor connection
• Direct-fit replacement for the specified OE reference
• Brand new, high-quality aftermarket component

SPECIFICATIONS

• Product type: Window regulator with motor
• Operating mode: Electric
• Placement on vehicle: Rear right (rear driver side)
• Motor connector: 2 pins
• OE reference number: CVH101202
• Part specification: High quality aftermarket
• Condition: Brand new
• MPN/Item No.: 101218
• Manufacturer warranty: 1 year (part only)
• Quantity supplied: 1 piece

VEHICLE COMPATIBILITY

• Land Rover Freelander L314 02/1998 – 04/2007

Always compare the OE reference number and product images with your original part to confirm compatibility before purchase.

ANTI-PINCH FUNCTION SETUP (IF APPLICABLE)

If the vehicle uses an anti-pinch function, the motor must be correctly initialised after installation.

• Do not operate or test the motor before it is installed in the door.
• Install the regulator and connect it to the one-touch window switch.
• Operate the window up; if it drops after reaching the top, perform a reset.

Reset procedure:

• Step 1: Pull the window switch briefly to move the glass fully to the top.
• Step 2: Hold the one-touch switch up for 3–5 seconds at the top position.
• Step 3: Press the window switch briefly to move the glass fully to the bottom.
• Step 4: Hold the one-touch switch down for 3–5 seconds at the bottom position.
• Step 5: Pull the one-touch switch to move the window to the top and confirm it remains closed.

If the window still drops after reaching the top, repeat the reset steps until the function is correctly set.

INSTALLATION & NOTES

• Professional installation by a qualified automotive mechanic is recommended.
• Part is intended for repair and replacement of the original regulator only.
• Product images are for reference; colour or finish may vary slightly due to screen settings and lighting.