Rear Right Electric Window Regulator (No Motor) for Toyota Kluger MCU28R 03–07

PRODUCT OVERVIEW

This rear right electric window regulator is a high-quality aftermarket replacement designed for Toyota Kluger MCU28R models from 11/2003 to 07/2007. It is supplied without a motor and is suitable for repair and replacement of the original regulator assembly.

KEY FEATURES

• Application-specific design for Toyota Kluger MCU28R (11/2003–07/2007)
• Rear right position (rear driver side)
• Electric operating mode
• Window regulator only – motor not included
• High quality aftermarket construction
• Brand new part, supplied as a single piece
• Backed by a 1-year part-only warranty

SPECIFICATIONS

• Product: Window regulator
• Operating mode: Electric
• Placement on vehicle: Rear right (rear driver side)
• Motor: Not included
• Part type: High quality aftermarket
• Condition: Brand new
• MPN/Item No.: 101312
• Warranty: 1 year (part only)
• Quantity supplied: 1 piece

FITMENT DETAILS

• Toyota Kluger MCU28R 11/2003–07/2007, 3MZFE 3.3L, SUV mid-size (rear right window regulator only)

Always compare this regulator and mounting points with your original part before purchase to ensure correct fitment.

ANTI-PINCH MOTOR SETUP NOTE

If used with a window motor that has an anti-pinch function, the motor must be correctly set up in the door. Do not test the motor before installation, as this can cause the anti-pinch function to fail and require resetting.

ANTI-PINCH RESET PROCEDURE

• Step 1: Pull the window switch briefly to move the glass slightly up to the top.
• Step 2: Hold the one-touch up switch for 3–5 seconds at the top position.
• Step 3: Press the window switch briefly to move the glass slightly down to the bottom.
• Step 4: Hold the one-touch down switch for 3–5 seconds at the bottom position.
• Step 5: Use the one-touch up function to move the window fully to the top and confirm it no longer drops back down.

If the window still drops after reaching the top, repeat the above steps until the anti-pinch function is correctly set.

INSTALLATION & WARRANTY NOTICE

• This component is intended for repair and replacement use only.
• For warranty validity, installation should be carried out by a qualified automotive mechanic.
• Images are for reference; colour and minor details may vary slightly from the actual product.
• Match the product images and specifications to your original part before ordering.