Red Line 2-Stroke Racing Oil 473mL Ester Synthetic RED40603

PRODUCT OVERVIEW

Red Line 2-Stroke Racing Oil (part number RED40603) is a high-performance ester synthetic lubricant designed for two-cycle engines in racing and demanding applications. Supplied in a 473mL bottle, it delivers strong protection, clean operation, and consistent power.

KEY FEATURES

• Ester base oils provide very high film strength and strong affinity for hot metal surfaces.
• Enhances power output with excellent scuff and wear protection under high load.
• Castor-like lubricating qualities with significantly improved cleanliness.
• Low carbon residue helps reduce spark plug fouling and visible exhaust smoke.
• High-temperature stability limits deposits on combustion chambers, exhaust ports, rings and piston crowns.
• Compatible with reformulated and modern pump fuels.
• Suitable for both premix and oil injection two-stroke systems.
• Dyno-tested gains of approximately 3–5% power and improved performance over longer runs.
• Formulated for extreme cleanliness in performance and racing two-cycle engines.

APPLICATIONS

• High-performance and racing two-stroke engines.
• Suitable for applications such as motorcycles, marine, snowmobile and kart racing where specified.
• Use in premix or injection systems as recommended by the engine or equipment manufacturer.

MIX RATIOS & USAGE

• Suggested mix ratio: 50:1 for typical performance use.
• Can be used at ratios up to 100:1 where operating conditions and engine requirements allow.
• Always follow engine or equipment manufacturer recommendations for specific mix ratios.

CHEMISTRY NOTES

The chemistry used in Red Line Two-Cycle Kart Oil and Two-Stroke Racing Oil is identical; only the labelling differs.

SPECIFICATIONS

• Brand: Red Line
• Product: 2-Stroke Racing Oil
• Part number: RED40603
• Volume: 473mL (approx. 16 fl oz)
• Base oil type: Ester synthetic
• System type: Premix or injection two-cycle engines

FITMENT NOTICE

No specific vehicle compatibility is provided for this product. Confirm suitability with your engine or equipment manufacturer before use.