Throttle Body Assembly for Toyota RAV4 ACA33 2.4L 2AZ-FE 2005–2012

PRODUCT OVERVIEW

This throttle body assembly is designed for Toyota RAV4 ACA33 2005–2012 with 2.4L 2AZ-FE petrol engines. It restores accurate air intake control and stable idle performance when replacing a worn or faulty original unit.

KEY FEATURES

• Brand new electronic throttle body assembly
• Engineered for Toyota RAV4 ACA33 2.4L 2AZ-FE petrol
• 3-tube configuration (not suitable for 4-tube types)
• Premium construction for reliable performance
• Supplied ready to install with electronic actuator

FITMENT DETAILS

Intended application:

• Toyota RAV4 ACA33 SUV
• Model years: 2005–2012
• Engine: 2.4L 2AZ-FE petrol
• 3-tube throttle body type only

Note: Comes with 3 tubes. Not suitable for 4-tube type. Compare your existing unit before purchasing.

INSTALLATION & IDLE RELEARN

After replacing or cleaning the throttle body, an idle relearn (self-adaptation) procedure is required to ensure proper operation. Always refer to the latest factory vehicle service manual or approved technical information for the correct procedure for your vehicle.

Basic conditions commonly required for throttle adaptation:

• All electrical accessories switched off
• Engine coolant temperature at normal operating range
• Battery voltage above recommended level
• Automatic transmission in Park (P)
• Accelerator pedal not pressed during basic setting

Installation and adaptation should be carried out by a qualified technician with appropriate diagnostic equipment where required.

INSTALLATION NOTES

• Mounts on the intake manifold in place of the original throttle body
• Inspect and clean the flange surface; replace seals and gaskets as needed
• Avoid damage to the intake manifold flange during removal and installation
• Allow engine to cool before disconnecting any coolant or vacuum hoses
• Protect electrical connectors from moisture and contamination
• Observe correct bolt tightening sequence and torque as specified by the manufacturer

Professional installation is strongly recommended to ensure correct operation, proper sealing and successful throttle adaptation.